Stanton S-700 manual LCD Display, Operating Instructions

LCD DISPLAY

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1.PLAY – lit while the unit is playing a CD.

2. PAUSE - Lit during pause or cue mode.

3.CUE – Lit when the unit is at a cue point.

4.CUE MEMORY CALENDAR - The numeral on the cue memory calendar shows to indicate which cue memory is set previously. It will flash while the cue is being set or recalled.

5.PROGRAM – Lit when program mode is set or played.

6.SINGLE - Lit when the unit is set to play just one track at a time. When this is not lit the CD will play continuously through all tracks. The function is controlled by the SGN/CTN BUTTON.

7.ELAPSED, TOTAL REMAIN - These indicate that the time shown on the display is the ELAPSED, TOTAL REMAINING or single song remaining time.

8.LOOP - Lit when the CD is repeating a particular area with the music on the CD.

9.RELOOP – Lit when the CD has had a loop set previously and can go back to loop again.

10.TRACK – shows the track that is currently playing.

11.~ 14. TRACK, MINUTE, SECOND, FRAME These displays indicate information on the current track and time

15.BPM - Lit when BPM button is engaged

16.PITCH/BPM – Shows either the percentage change in pitch or the BPM of the song depending on the mode selected with the BPM BUTTON.

17.PITCH - Indicator light shows percentage of pitch is displayed.

18.ANTI SHOCK AND BUFFER INDICATOR – The memory status is represented on the display by a bucket being filled or emptied. The bucket itself represents the instant start function (which works by buffer ). If the bucket is not lit, the instant start is not available. Each bar within the bucket represents 5 seconds of anti shock protection. There is up to 20 seconds of anti shock available. In Playback Mode, It takes 20 seconds to enable the Anti Shock. In Pause Mode, It will take only 10 seconds to enable the Anti Shock.

OPERATING INSTRUCTIONS

1.OPENING AND CLOSING the Disc Tray and Loading Discs

a)Opening and closing the disc tray

This operation only works when the power is on. Press the OPEN/CLOSE button(8) to open or close the disc tray. OPEN/CLOSE button(8) are provided on both the main unit and control unit.

Press PLAY button to automatically close tray.

If tray is not closed after 60 seconds it will close automatically and pause.

The disc trays cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. Stop playback, then press the OPEN/CLOSE button(8).

2.Loading discs

Hold the disc by the edges and place it in the disc tray. Do not touch the single surface (the glossy side).

When using 12cm discs, place the disc in the outer tray guides.

CAUTION:

Do not play foreign objects in the disc tray, and do not place more than one disc in the disc tray at a time. Doing so may result in malfunction.

Do not push the disc tray in manually when the power is off, as this may result in malfunction and damage the player.

3. Selecting Tracks

Select desired track using NUMBER Button(4) or press the TRACK Buttons once to move to one higher or lower track or Hold the TRACK buttons(24) in to change tracks continuously at a higher speed.

When a new track is selected during playback, playback begins as soon as the search operation is completed.

4. Starting Playback

Press the PLAY/PAUSE button(22) during the pause or cue to start playback.

The PLAY indicator lights when playback starts.

5. Stopping Playback

There are two ways to stop playback.

1)Press the PLAY/PAUSE button(22) during playback to pause at that point

2)Press the CUE button(14) during playback to return to the position at which playback started(Back Cue).

6.Pausing

Press the PLAY/PAUSE button(22) to switch between play and pause.

The PAUSE indicator lights when the pause mode is set.

6