Before starting, Electrical Connection | Whirlpool DP6000XR Series

Connecting your portable dishwasher

A special adapter must be installed on the faucet before the dishwasher can

be connected. Complete instructions and the adapter are packed with your dishwasher.

When moving your dishwasher, make sure 3. Lift slightly on the hose connector while pull-

the door is latched.ing down the locking collar. Pull down on the connector.

4 Empty any remaining water from the connector.

5. Unplug power supply cord and return to storage compartment.

6. Return hoses to storage Compartment.

Before starting

1. Run water at faucet until it is hot. Turn it off.

PULL RING

2.Pull hoses out of their storage compartment on the back.

LOCKING COLLAR

HOSE CONNECTOR

3.Pull down on the locking collar while lifting the hose connector onto the faucet adapter.

4.When the connector snaps into place, re- lease the locking collar.

5.Turn the hot water on slowly until it is all the way on.

6.Plug in power supply cord.

7.See pages 8 and 9 to start the dishwasher.

While dishwasher is running

You can draw water from the faucet while the

dishwasher is connected. DO NOT draw water while the dishwasher is filling or while water is being pumped out. [This helps prevent a low fill when dishwasher is filling, or mixing drain water with fresh wafer.]

1.Press red button on hose connector to get the water you want. (The faucet is set on hot. Adjust faucet for the water you want.)

2.Be sure you return cold water to off, and that hot water Is full on.

When cycle is finished

1.Turn hot water off. (This can be done after the last rinse.)

2.Press the red button on the connector to re- lease the water pressure.

Electrical Connection

A power supply of 120 volts, 60Hz AC only, 15 amps, is required. For your personal safety, this

appliance must be grounded. This appliance

is equipped with a power supply cord having a 3-prong grounding plug. To minimize possi- ble shock hazard it must be plugged into a mating J-prong grounding type wall recepta-

cle, grounded in accordance with the Na- tional Electrical Code and local codes and

ordinances. If a mating wall receptacle is not

available, it is the personal responsibility and obligation of the customer to have a properly

grounded J-prong wall receptacle installed

by a qualified electrician. DO NOT use an ex- tension cord.

Power Supply Cord

DO NOT, UNDER ANY CIRCUMSTANCES, RE- MOVE THE POWER SUPPLY CORD GROUND PRONG.

Converting to built-in

Your Whirlpool Portable Dishwasher can be

converted to a built-in (undercounter) model by using conversion kit No. 569056. The kit is

available at your Whirlpool dealer or autho- rized TECH-CARE” Service Company. Instruc- tions are included with the kit.

Caring for

simulated wood top

The simulated wood top can be used as a utility work surface for most kitchen jobs. It is stronger and more easily cleaned than genu- ine wood.

The top can be used as a cutting board. Knife marks will be visible but will not seriously dam- age top. Hot items from the oven can be placed on the top.

Clean with warm, soapy water. For dried on foods, use a scouring pad.

DP6000XR Series specifications

The Whirlpool DP6000XR Series is a versatile and efficient range of kitchen appliances that cater to modern culinary needs. Designed with user convenience and advanced technology at the forefront, this series offers a range of models including dishwashers, microwaves, and traditional ovens that not only meet but exceed performance expectations.

One of the standout features of the Whirlpool DP6000XR Series is its focus on energy efficiency. These appliances are equipped with advanced insulation and smart energy-saving modes that help reduce energy consumption, leading to lower utility bills while being eco-friendly. This aligns with today's consumer demands for sustainable living without sacrificing performance.

A defining characteristic of the DP6000XR Series is its intuitive control panel. With easy-to-read digital displays and straightforward settings, users can effortlessly navigate through various functions. This includes customizable cooking modes and programmable timers, making meal preparation smoother and more convenient.

The series also embraces innovative technologies such as the Adaptive Smart Sensor. This intelligent feature automatically adjusts cooking times and temperatures based on the food's density and moisture content, delivering perfect cooking results every time. Additionally, the precision cooking technology ensures that every dish is cooked evenly, eliminating the guesswork often associated with traditional cooking methods.

In terms of design, the Whirlpool DP6000XR Series combines elegance with functionality. The stainless steel finish not only enhances durability but also adds a modern aesthetic to any kitchen. The sleek design incorporates well-thought-out storage solutions, allowing users to make the most out of limited kitchen space.

Safety features are another cornerstone of the DP6000XR Series. With child lock settings, automatic shut-off mechanisms, and heat-resistant glass, these appliances provide peace of mind for families while cooking. Furthermore, the easy-clean surfaces and removable components are designed to simplify maintenance, ensuring that the appliances remain in optimal condition.

In summary, the Whirlpool DP6000XR Series merges innovation and practicality with its energy-efficient technologies, user-friendly interfaces, and stylish design. These appliances cater to diverse cooking styles and preferences, making them an excellent addition to any modern kitchen. Whether you're a seasoned chef or a home cooking enthusiast, the DP6000XR Series is engineered to enhance your culinary experience.