Whirlpool DU1099XT manual Heat DRY or AIR DRY?, Changing a setting, To add a dish after starting

LIGHT WASH Cycle

For normal, everyday soiled loads Cycle time is about 60 minutes.

RINSE & HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.

Use AIR DRY only.

HEAT DRY or AIR DRY?

If the HEAT DRY Option is selected, air in the dishwasher is heated during the “dry” part of the cycle.

If the AIR DRY Option is selected, air in the dishwasher is not heated. Using thisoption helps save energy, but dishes take longer to dry (over-

Changing a setting

You can change a setting anytime during any cycle.

1.Lift up on the door latch to unlatch the door and stop the cycle. Don’t open the door until the spray arms stop spinning.

2.Turn the Cycle Control Knob clockwise to the cycle you want.

night] and some water spotting may result. Some items (such as plastics) may need towel drying.

For best results, use a solid rinse aid.

3.Be sure the detergent dispensers are filled properly for the new cycle.

4.Press door firmly to latch it. The dishwasher

will automatically start the new cycle.

To add a dish after starting

1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LIGHT.

2.Lift up on the door latch to unlatch door to stop the cycle. Don’t open the door until the spray arms stop spinning.

3.Open the door and add the dish.

4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle.

5.Press door firmly to latch it. The dishwasher

will automatically start where it stopped.

9