Whirlpool Series 400, 806 Changing a cycle setting, Adding an item during a cycle, On some models

Page 15

Changing a cycle setting

(on some models)

You can change a cycle setting anytime during any cycle.

1.Lift up the door latch to stop the cycle.

2.Turn the Cycle Control Knob clockwise to the desired cycle.

3.Check the detergent dispensers. They must be filled properly for the new cycle. NOTE: Turning the Cycle Control Knob can cause the covered section of the detergent dispenser to open and release the detergent. Check the covered section if setting Normal Wash or Pots & Pans cycle.

4.Close the door firmly until it latches. The dishwasher starts the new cycle.

Adding an item during a cycle

(on some models)

You can add an item to the dishwasher anytime before the Cycle Control Knob reaches Light Wash. Items added after the Cycle Control Knob reaches Light Wash will only be rinsed.

1.Lift up the door latch to stop the cycle. Wait for spraying action to stop before opening the door.

2.Open the door and add the item.

3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. Doing so reduces the amount of moisture in the vent when restarting

a cycle.

4.Close the door firmly until it latches. The dishwasher resumes the cycle.

15

Image 15

Contents UseAndCare 800-253-1 30 Thank you for buying a Whirlpool@ appliancePlease record your model’s information Your safety is important to us Important Safety InstructionsOn right side Parts and FeaturesSeries 840 models Before You Use Your Dishwasher Stopping the dishwasher Loading the silverware basket Loading Your DishwasherPreparing to load your DishwasherLoading the bottom rack Mixed loadUtensil load Cup and glass load Loading the top rackFilling the detergent dispenser Using the DispensersUsing the detergent dispenser Water Type Where to FillUsing the rinse agent dispenser To check dispenserTo fill dispenser Selecting a wash cycle Setting the ControlsAir Dry option Canceling a cycleSelecting cycle options Heat Dry optionChanging a cycle setting Adding an item during a cycleOn some models Washing Special Items MaterialEXCEPTIONS/SPECIAL Electrical connection Connecting a Portable DishwasherDrawing water when dishwasher is connected Connecting the dishwasherConverting a portable dishwasher to a built-in Disconnecting the dishwasherCaring for Your Dishwasher Caring for simulated wood topOn portable models Cleaning the interior Cleaning the filter screenOverfill protector ’ ,’ Storing your dishwasherMoving or winterizing your dishwasher ’,’/,’ ,’ +Storing for the summer Reconnecting your dishwasherSaving Energy Loading tipsCycle and option tips Problem Solving Common Dishwashing ProblemsSolution Chart‘ROBLEM Cause Solution Removing spots and film Problem CauseTroubleshooting ProblemsCheck the Following If you are not satisfied with how the problem was solved ServiceIf you need service If you need FSP@ Replacement partsIndex Warranty