Whirlpool 806, Series 400, 830 warranty Troubleshooting, Problems, Check the Following

Page 28

Troubleshooting

Before calling for assistance please check the chart below for problems you can fix. It could save you the cost of a service call.

Dishwasher

PROBLEM

Dishwasher does not run or stops during a cycle

Dishwasher will not fill

Water remains in dishwasher

Detergent remains in covered section of dispenser

Dishes not as dry as you expected

White residue appears on front of access panel

Dishwasher will not close

problems

CHECK THE FOLLOWING

Is the door tightly closed and securely latched?

Has the cycle been set correctly? See the “Setting the Controls” section.

Has a household fuse blown or circuit breaker tripped?

If the motor stopped because of an overload, it will automatically reset itself within a few minutes. If it does not start, call for service.

Is the water SUDDIVturned on?

Is the overfill protector stuck in ‘up” position? Overfill protector should move up and down freely. Press down to release. See the “Carina for Your Dishwasher” section.

Allow cycle to finish. A small amount of water remainina is normal.

Check the drain air gap (if installed). If it is clogged, follow the manufacturer’s cleaning instructions.

Has the cycle completed?

Is the detergent fresh and dry without lumps? See the “Using the Dispensers” section.

Is the bottom rack in backwards? The rack bumpers must face the dishwasher door.

Is the rinse agent dispenser empty? Using a rinse agent greatly improves drying. See the “Usingthe Dispensers” section.

Do not use Air Dry option on the next load. See the “Setting the Controls” section.

Is too much detergent being used? See the “Using the Dispensers” section.

Some liquid detergents develop excess foam and residue on panel. Try a different brand to reduce foaming and eliminate buildup:

Is the bottom rack in backwards? The rack bumpers must face the dishwasher door.

28

Image 28
Contents UseAndCare Thank you for buying a Whirlpool@ appliance 800-253-1 30Please record your model’s information Important Safety Instructions Your safety is important to usParts and Features On right sideSeries 840 models Before You Use Your Dishwasher Stopping the dishwasher Loading Your Dishwasher Preparing to load yourDishwasher Loading the silverware basketMixed load Loading the bottom rackUtensil load Loading the top rack Cup and glass loadUsing the Dispensers Using the detergent dispenserWater Type Where to Fill Filling the detergent dispenserTo check dispenser Using the rinse agent dispenserTo fill dispenser Setting the Controls Selecting a wash cycleCanceling a cycle Selecting cycle optionsHeat Dry option Air Dry optionAdding an item during a cycle Changing a cycle settingOn some models Material Washing Special ItemsEXCEPTIONS/SPECIAL Connecting a Portable Dishwasher Electrical connectionConnecting the dishwasher Drawing water when dishwasher is connectedDisconnecting the dishwasher Converting a portable dishwasher to a built-inCaring for simulated wood top Caring for Your DishwasherOn portable models Cleaning the filter screen Cleaning the interiorOverfill protector Storing your dishwasher Moving or winterizing your dishwasher’,’/,’ ,’ + ’ ,’Reconnecting your dishwasher Storing for the summerLoading tips Saving EnergyCycle and option tips Solving Common Dishwashing Problems SolutionChart Problem‘ROBLEM Cause Solution Problem Cause Removing spots and filmProblems TroubleshootingCheck the Following Service If you need serviceIf you need FSP@ Replacement parts If you are not satisfied with how the problem was solvedIndex Warranty