Whirlpool FEP314B important safety instructions Problem, Possible Cause

Page 26

PROBLEM

Control knob(s) will not turn

Cooking

results are not what you expected

POSSIBLE CAUSE

You are not pushing in before trying to turn.

The range is not level.

The oven temperature seems too low or too high.

The oven was not pre- heated as the recipe calls for.

The recipe has never been tested or is not from a reliable source.

The pan used is not the type or size recommended in the recipe.

There is not proper air circulation around pan when baking.

The cooking utensils are not the proper shape or do not fii the surface units being used.

SOLUTION

Push control knob(s) in before turning to a setting.

Level range. (See Installation Instruc- tions.)

Adjust the oven temperature control. (See “Adjusting the oven temperature control” on page 13.)

Preheat oven if called for in recipe.

Use only tested recipes from a reliable source.

Refer to a reliable cookbook for recom- mended pan type and size.

Allow 1% to 2 inches (4-5 cm) on all sides of the pans for air circulation. There must be a minimum space of 1 inch (2.5 cm).

Use cooking utensils with smooth, flat bottoms that fit the surface units being used.

26

Image 26 Contents
UseA%Care Your safety is important to us Thank you for buying a Roper@ applianceImportant Safety Instructions Page Page Parts and Features Control PanelUsing Your Range Using the surface unitsCookware tips Using the ceramic glass cooktopSetting Recommended USE Home canning information Positioning racksPans Using aluminum foil for baking For best air circulationSetting the clock Using the Minute TimerBaking/roasting Adjusting the oven temperature ControlBroiling Custom broilBroiling rack Bosition chartBroiling tips Type of Food DonenessEnergy saving tips Oven ventStorage drawer Anti-tip bracket Optional door panel patThis Section Cleaning the cooktopCaring for Your Range Cleaning tips Removing the oven door Part Cleaning other range parts HOW to Clean What to USEPart What To USE Oven light Solution If You Need Assistance or ServiceProblem Possible Cause Before calling for assistanceProblem Possible CauseIf you are not satisfied with how the problem was solved If you need serviceIf you need FSP@ Replacement parts WE will PAY for Length of WarrantyFull THREE-Y EAR Warranty WE will not PAY for