Whirlpool 2314463 Electrical Requirements, Water Supply Requirements, Connect the Water Supply

Page 4

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Drill bit

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

Hand drill or electric drill

 

adjustable wrenches

 

(properly grounded)

■¹⁄₄" nut driver

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Water Pressure

A cold water supply with water pressure of between 30 and

120 psi (207 - 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 - 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 - 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 - 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

■Make sure it is a cold water pipe.

■Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a grounded drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Table of Contents / Table des matières Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerInstallation Instructions Clean Before UsingUnpack the Refrigerator Location RequirementsWater Supply Requirements Electrical RequirementsConnect the Water Supply Complete the Installation Refrigerator DoorsConnect to Refrigerator Remove Doors and HingesReplace Doors and Hinges Reverse Doors optionalFinal Steps Door Removal Replacement Using the Controls Adjust the DoorsRefrigerator USE Cleaning Refrigerator CareCrisper Humidity Control Ice MakerTemperature and Moisture TroubleshootingRefrigerator Operation Crosley Major Appliance Warranty Ice and WaterIce maker is not producing ice or not enough ice Ice cubes are hollow or smallGuide D’UTILISATION ET D’ENTRETIEN DU Réfrigérateur Sécurité DU RéfrigérateurDéballage du réfrigérateur Instructions DinstallationRetirer les matériaux d’emballage Exigences demplacement Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement de la canalisation deau Pression de leauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauAchever l’installation Portes du réfrigérateurDémontage Portes et charnières Inversion du sens d’ouverture des portes facultativeRéinstallation Portes et charnières Étapes finalesPorte du compartiment de congélation Porte du compartiment de réfrigérationDémontage et réinstallation de la porte Utilisation DU Réfrigérateur Utilisation des commandesAjustement des portes Entretien DU Réfrigérateur Réglage de lhumidité dans le bac à LégumesMachine à glaçons NettoyageDépannage Remplacement des ampoules ’éclairageFonctionnement du réfrigérateur Température et humidité Glaçons et eauWhirlpool NE Prendra PAS EN Charge Garantie Limitée DE UN ANComposer le 1-800-253-1301. Au Canada, composer le 2314463

2314463 specifications

The Whirlpool 2314463 is a high-quality refrigerator water filter designed to provide clean and fresh water while ensuring that your ice and drinking water tastes great. As a genuine OEM replacement part, it is compatible with various Whirlpool refrigerator models, making it a reliable choice for many households.

One of the chief features of the Whirlpool 2314463 is its advanced filtration technology. The filter employs a carbon-based filtration system that effectively removes impurities, such as chlorine, heavy metals, sediment, and other contaminants commonly found in tap water. This ensures that the water you consume is not only safe but also free from unpleasant tastes and odors.

The installation of the Whirlpool 2314463 is straightforward, making it user-friendly for consumers who want to replace their water filter without the need for professional assistance. Typically, the filter slides into place easily within the refrigerator's filter compartment, allowing for quick and hassle-free replacements. This is especially beneficial for busy households where time is of the essence.

The filter's lifespan is another significant characteristic. The Whirlpool 2314463 is designed to last up to six months, depending on the water quality and usage frequency. This longevity not only provides convenience but also ensures that households do not have to frequently purchase replacements, making it an economical choice over time.

Moreover, the Whirlpool 2314463 is compliant with various industry standards, ensuring that it meets safety and performance guidelines for water filters. This means consumers can have peace of mind knowing that the filter they are using adheres to stringent quality controls.

In terms of packaging and availability, the Whirlpool 2314463 is widely available through various retailers, both online and in physical stores specializing in home appliances and parts. This accessibility ensures that homeowners can easily find and purchase the filter when they need a replacement.

In summary, the Whirlpool 2314463 water filter stands out due to its advanced carbon filtration technology, ease of installation, long lifespan, and compliance with safety standards. These features collectively enhance the quality of water in your home, providing families with reliable access to clean drinking water. Whether you're making beverages or cooking, the Whirlpool 2314463 ensures that every sip counts.
Top Page Image Contents