Whirlpool 2314463 warranty Refrigerator USE, Adjust the Doors, Using the Controls

Page 8

Mid-setting “3”

Adjust the Doors

Door Closing

Your refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below.

1.Remove the base grille. See the Base Grille graphic in

“Refrigerator Doors.” The two leveling screws are part of the front roller assemblies which are at the base of the refrigerator on either side.

2.Use a screwdriver to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers. This makes it easier to adjust the screws.

3.Open both doors again and check to make sure that they close as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws the same amount.

4.Replace the base grille.

Align Doors

If the space between your doors looks uneven, you can adjust it using the instructions below:

1.Pry off the top hinge cover.

2.Loosen the top hinge screws using a ⁵⁄₁₆" socket or wrench.

3.Have someone hold the door in place or put a spacer between the doors while you tighten the top hinge screws.

4.Replace the top hinge cover.

REFRIGERATOR USE

Using the Controls

For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still preset to the mid-settings as shown.

NOTE: To turn your refrigerator off, turn the refrigerator control to the word OFF or until the word OFF appears. Your product will not cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “4”

REFRIGERATOR

4

4

FREEZER

 

 

IMPORTANT:

■Give your refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator.

■If you add food before the refrigerator has cooled completely, your food may spoil. Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.

Adjusting Controls

The mid-settings indicated in the previous section should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the chart below as a guide. On models with two controls, adjust the refrigerator temperature first. Wait at least 24 hours between adjustments and then recheck the temperatures.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

REFRIGERATOR or

 

TEMPERATURE Control one

 

setting higher

 

 

FREEZER too warm/too

FREEZER or TEMPERATURE

little ice

Control one setting higher

 

MAX ice production switch

 

 

REFRIGERATOR too cold

REFRIGERATOR or

 

TEMPERATURE Control one

 

setting lower

 

 

FREEZER too cold

FREEZER or TEMPERATURE

 

Control one setting lower

 

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Table of Contents / Table des matières Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerInstallation Instructions Clean Before UsingUnpack the Refrigerator Location RequirementsConnect the Water Supply Electrical RequirementsWater Supply Requirements Complete the Installation Refrigerator DoorsConnect to Refrigerator Remove Doors and HingesFinal Steps Reverse Doors optionalReplace Doors and Hinges Door Removal Replacement Refrigerator USE Adjust the DoorsUsing the Controls Cleaning Refrigerator CareCrisper Humidity Control Ice MakerRefrigerator Operation TroubleshootingTemperature and Moisture Crosley Major Appliance Warranty Ice and WaterIce maker is not producing ice or not enough ice Ice cubes are hollow or smallGuide D’UTILISATION ET D’ENTRETIEN DU Réfrigérateur Sécurité DU RéfrigérateurRetirer les matériaux d’emballage Instructions DinstallationDéballage du réfrigérateur Exigences demplacement Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement de la canalisation deau Pression de leauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauAchever l’installation Portes du réfrigérateurDémontage Portes et charnières Inversion du sens d’ouverture des portes facultativeRéinstallation Portes et charnières Étapes finalesPorte du compartiment de congélation Porte du compartiment de réfrigérationDémontage et réinstallation de la porte Ajustement des portes Utilisation des commandesUtilisation DU Réfrigérateur Entretien DU Réfrigérateur Réglage de lhumidité dans le bac à LégumesMachine à glaçons NettoyageFonctionnement du réfrigérateur Remplacement des ampoules ’éclairageDépannage Température et humidité Glaçons et eauComposer le 1-800-253-1301. Au Canada, composer le Garantie Limitée DE UN ANWhirlpool NE Prendra PAS EN Charge 2314463

2314463 specifications

The Whirlpool 2314463 is a high-quality refrigerator water filter designed to provide clean and fresh water while ensuring that your ice and drinking water tastes great. As a genuine OEM replacement part, it is compatible with various Whirlpool refrigerator models, making it a reliable choice for many households.

One of the chief features of the Whirlpool 2314463 is its advanced filtration technology. The filter employs a carbon-based filtration system that effectively removes impurities, such as chlorine, heavy metals, sediment, and other contaminants commonly found in tap water. This ensures that the water you consume is not only safe but also free from unpleasant tastes and odors.

The installation of the Whirlpool 2314463 is straightforward, making it user-friendly for consumers who want to replace their water filter without the need for professional assistance. Typically, the filter slides into place easily within the refrigerator's filter compartment, allowing for quick and hassle-free replacements. This is especially beneficial for busy households where time is of the essence.

The filter's lifespan is another significant characteristic. The Whirlpool 2314463 is designed to last up to six months, depending on the water quality and usage frequency. This longevity not only provides convenience but also ensures that households do not have to frequently purchase replacements, making it an economical choice over time.

Moreover, the Whirlpool 2314463 is compliant with various industry standards, ensuring that it meets safety and performance guidelines for water filters. This means consumers can have peace of mind knowing that the filter they are using adheres to stringent quality controls.

In terms of packaging and availability, the Whirlpool 2314463 is widely available through various retailers, both online and in physical stores specializing in home appliances and parts. This accessibility ensures that homeowners can easily find and purchase the filter when they need a replacement.

In summary, the Whirlpool 2314463 water filter stands out due to its advanced carbon filtration technology, ease of installation, long lifespan, and compliance with safety standards. These features collectively enhance the quality of water in your home, providing families with reliable access to clean drinking water. Whether you're making beverages or cooking, the Whirlpool 2314463 ensures that every sip counts.
Top Page Image Contents