Beat Matching, Vinyl and Scratching, Using Effects

BEAT MATCHING

Adjusting the Pitch

With your first deck playing and your second deck cued, start playback in sync with the downbeat of the song playing on the other deck. Quickly adjust the pitch using the PITCH SLIDER to match the tempo of deck one. Moving the slider up (away from you) will decrease the tempo, while mov- ing it down will increase the tempo.

Pitch Bending

As you are finding the right tempo, the track position will drift until it is fine- tuned and the tempo is matched. Pitch Bending provides a quick fix to keep the position as close as possible to deck one. Pressing the PITCH BEND – or PITCH BEND + buttons will decrease or increase the speed of playback temporarily. The extent to which the speed is changed is propor- tionate to the amount of time the button is pressed. For example, if the PITCH BEND + button is held in continuously, the speed continues to increase until the maximum limit set by the PITCH RANGE is reached. Once the PITCH BEND + button is released the pitch will return to the pitch set by the PITCH SLIDER.

The jog wheel can also be used to temporarily bend the pitch of the music during normal playback. Rotate the wheel clockwise to speed up and counter-clockwise to slow down. The speed that you rotate the jog wheel determines the percent of pitch bend. It is recommended that you use the outer edge of the jog wheel for this type of control, as touching the top sur- face may cause interruption of playback in certain modes of operation.

Key Lock

This functions allows the tempo or BPM of the music to be altered without affecting the musical key. While this button is illuminated, the key will be locked at zero. This is handy when accelerating tracks to avoid the chip- munk effect.

VINYL AND SCRATCHING

Vinyl Mode

In Vinyl Mode the inner jog wheel will simulate the behavior of a turntable. The top surface of the wheel is touch sensitive. Putting your hand on the wheel will stop playback, as it would on a vinyl record. Once playback is stopped, moving the wheel back and forth will create a scratching effect, like on an analog turntable.

• To activate Vinyl mode, press the VINYL button.

Adjusting the Vinyl Start and Brake times

You can adjust the start and brake times so it starts up like a turntable when pressing the PLAY/PAUSE button while in vinyl mode.

•Hold the VINYL button until is starts flashing

•Use the encoder labeled VINYL START (left) to adjust the start time. Simply turning the encoder will fine tune the start time. For a faster adjustment, push down on the encoder while turning the outer jog wheel.

•Use the right encoder, labeled VINYL BRAKE to adjust the brake time. Follow the same instructions as for the start time.

•Press the VINYL button to exit

Touch Rewind

With this feature active, every time you touch the top wheel surface, play- back pause and return to the last cue point. Upon releasing the wheel, playback will resume from that cue point. This enables a quick and effec- tive beat juggling effect with a single record… or cd rather.

• To activate Touch Rewind mode, press the TOUCH REWIND button.

USING EFFECTS

Effects

There are seven on-board effects: auto filter, manual filter, echo, pan, phase, flanger, and transformer. Up to three effects can be used simulta- neously.

•To activate an effect, simply tap the desired FX SELECT button. Both fil- ters are activated via the FILTER button. The manual filter is activated by holding down the button until it lights up green.

Parameters

• Use the Time Division Indicators to change the effects time in sync with the music, or the FX TIME encoder to adjust it manually. When 1/4 is selected, the activated effect will modulate with every quarter beat; 1/2 signifies half beats; 3/4 signifies three quarter beats; 1/1 signifies one beat; 2/1 signifies 2 beats; and 4/1 signifies 4 beats (1 measure).

• The FX RATIO encoder controls the depth, feedback, or level, depending on the effect. This parameter can also be controled by the outer jog wheel by activating the OUTER JOG button.

Hint: With OUTER JOG active, turn on the manual filter by holding the FILTER button. Now, turn the outer wheel to create a filter sweep.

C.314 specifications

The Stanton C.314 is an advanced vinyl cutting machine that has garnered significant attention in the world of audio technology and DJing. This state-of-the-art device not only elevates the quality of audio playback but also integrates several cutting-edge features designed for modern music enthusiasts and professionals.

At the heart of the C.314 is its precision-engineered playback system, which ensures an exceptionally accurate reproduction of sound. This is accomplished through its high-fidelity stylus that tracks records with minimal distortion. The stylus is designed to adhere closely to the grooves of the vinyl, which contributes to clearer sound and greater detail in the audio output.

One of the standout characteristics of the Stanton C.314 is its advanced tracking capabilities. The machine features a stable base that minimizes vibrations and external disturbances, allowing it to maintain consistent playback even in less-than-ideal environments. This stability is crucial for DJs and audiophiles who require reliability during performances or listening sessions.

The C.314 also incorporates innovative digital technologies, including an integrated mixer that allows for seamless transitions between tracks. This feature is particularly beneficial for DJs who often blend songs live at events. The mixer provides equalization controls, allowing users to shape their sound to suit different environments or personal preferences.

Moreover, the Stanton C.314 is equipped with USB connectivity, permitting users to digitize their vinyl collections with ease. This technology enables music lovers to preserve their favorite records and access them digitally without compromising on sound quality. The machine’s compatibility with various software further enhances its functionality, making it a versatile tool for both recording and playback.

User-friendly design elements are another hallmark of the C.314. The intuitive controls and clear display facilitate easy navigation for users of all skill levels. Additionally, it features a robust build quality, ensuring durability and longevity, which is essential for regular use in various settings.

In summary, the Stanton C.314 is a sophisticated vinyl cutting machine perfect for both casual listeners and professional DJs. With its advanced playback technology, robust features, and thoughtful design, it stands as a testament to Stanton's commitment to innovation in the music equipment industry.