Harman-Kardon AVR 435 Technical Specifications, Audio Section, Supplied Accessories, General

Models: AVR 435

1 58
Download 58 pages 49.58 Kb
Page 57
Image 57
Technical Specifications

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

80 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

5/7 Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

65 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

65 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R Back) channels: 65 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47kohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz– 130kHz

High Instantaneous

 

Current Capability (HCC)

±40 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec**

Supplied Accessories

The following accessory items are supplied with the AVR 435.

If any of these items are missing, please contact Harman Kardon customer service at www.harmankardon.com.

A system remote control

A Zone II remote control

An Audio Section microphone

Extender rod for microphone

An AM loop antenna

An FM wire antenna

Six AAA batteries

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo: 70/68dB (DIN)

Distortion

Mono/Stereo: 0.15/0.2%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz: 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

520–1710kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop: 500µV

Distortion

1kHz, 50% Mod: 0.8%

Selectivity

±10kHz: 30dB

Video Section

 

Video Format

PAL/NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

Video Frequency

 

Response (Component)

10Hz-50MHz (-3dB)

General

 

Power Requirement

AC 220-240V/50Hz

Power Consumption

59W idle, 1040W maximum

 

(7 channels driven)

Dimensions (Max)

 

Width

440mm

Height

165mm

Depth

435mm

Weight

17.7 kg

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated.

Supplied Accessories is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “Pro Logic II,” "Pro Logix IIx" and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished

Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround, DTS-ES and DTS Neo:6 are trademarks of Digital Theater Systems, Inc.

Logic 7 is a registered trademark of Harman International Industries, Incorporated.

A-BUS and A-BUS Ready are registered trademarks of Leisure Tech Electronics Pty Ltd Australia.

TiVo is a registered trademark of TiVo, Inc.

Replay TV is a registered trademark of Digital Networks North America, Inc.

**Without input anti slewing and output isolation networks.

TECHNICAL SPECIFICATIONS 57

Page 57
Image 57
Harman-Kardon AVR 435 Technical Specifications, Audio Section, Supplied Accessories, FM Tuner Section, AM Tuner Section