Xantech mrc88 installation instructions Specifications, Certifications, Video, IR Sensor, General

Model MRC88Page: 99

SPECIFICATIONS

Audio (ea channel)
Min Input:	250mV for full rated Output
Input Overload:	>2.2 V RMS (@ max VC)
Input Impedance:	> 20 k Ohms
Power Output:	35 Watts RMS @ 4-8 Ohms
Signal to Noise:	>96dB A-Weighted
THD (VC –10dB):	<0.08% at 2V input level
Frequency Response (± 3dB):	12 Hz to 55 kHz
Bass Control Range (@ 100Hz):	±14dB (in 2 dB steps)
Treble Control Range (@ 10kHz):	±14dB (in 2 dB steps)
Video
Input/Output Impedance:	75 Ohms
Video Insertion Loss:	0 dB (50 Hz to 6 MHz)
IR Sensor
IR Modulation Frequency Bandwidth:	30 Hz to 100 kHz
Nominal Reception Range:	>30 feet
Nominal Reception Angle:	40 degrees off axis
General
RC68 Code Group Number:	A8
Control Output:	12 V @ 50 mA
Status Output:	12 V @ 50 mA
Power Requirements:	120 VAC, 60 Hz, 660 Watts max,
	TMRA 30° Celsius - If this temperature is exceeded, you will need
	to provide additional ventilation to insure proper operation.
Gold Plated RCA type phono jacks	All A/V inputs/outputs
Dimensions (Controller)	17” W x 7.5” H x 11.75” D (432mm x 191mm x 298mm)
Dimensions (Keypad):	4.5” W x 4.5” H x 1.5” D (114mm x 114mm x 38mm)
Weight (Controller):	45 lbs (20.4 kg)
Weight (Keypad):	0.6 lbs (0.3 kg)
CERTIFICATIONS

Product is certified as marked on the rear panel.

© 2003 Xantech Corporation