Xantech mrc88 installation instructions Keypad Features

Page: 12 Model MRC88

KEYPAD FEATURES

•Flush-mount, snap-in wall unit with universal wall mounting plate. Requires a 4" x 4" hole cutout in wall (use included template).

•Connects to MRC88 Controller/Amplifier via CAT5 cable terminated with RJ45 connectors.

•Configurable LCD panel (via supplied Dragon Drop-IR™ software).

•20 buttons (8 source select, 11 function, 1 power).

•Programmable dual functionality (tiered) “push-and-hold” on most buttons.

•Backlit LCD and buttons w/ rear panel brightness adjustment

•Variable backlight timeout.

•Bi-colored Status LED for power and status.

•Broadband IR receiver (30KHz to 100KHz) w/rear panel sensitivity adjustment.

•Rear Panel IR Input connections for addition of external IR Receivers and/or Keypads

•Rear Panel IR IN Zone Output connections for control of in-room components

•Two RJ45 connectors allow multiple keypads to be daisy-chained (up to 4 keypads per zone)

•Optional New Construction back-box (Xantech Part# MRCBOX) for Keypad mounting.

© 2003 Xantech Corporation