Xantech mrc88 Transferring The Project, Basic, Configuring Commands for IR IN ZONE

Page: 62 Model MRC88

Figure 32: Configuring Commands for IR IN ZONE

TRANSFERRING THE PROJECT

(BASIC)

The project can now be transferred to the MRC88 if it is being set up in the Basic mode. For Advanced and Expanded systems, continue to next section. See page 77 “Transferring a Project” for instructions.

NOTE: For Advanced systems you may also transfer the project at this time for a System Test before getting into more complex system features only available in ADVANCED Mode.

© 2003 Xantech Corporation