Xantech mrc88 installation instructions Expanded

Model MRC88 Page: 85

2.Press the button for the zone to be unlinked. (Z1, Z2, etc) The keypad status LED’s will show ‘busy’ (rapid amber flash) for 10 seconds after the last button press, then ‘time out’ and return to normal use mode (LED /green, LCD/normal display). The small ‘L’ will no longer appear. The zones will resume independent control.

(EXPANDED)

Same as above, using the Status button in “Link Session” to access zones 9-16.

© 2003 Xantech Corporation