Page: 76 | Model MRC88 |
2.Any RS232 Commands placed on any keypad will be executed out of the PRIMARY Controllers rear RS232 Connector ONLY regardless of which zone is issuing the command. This means if interfacing to another RS232 device, this device will need to be connected to the PRIMARY Controllers RS232 port.
From Source | From Source |
Component 1 | Component 8 |
Sources 1 through 8
Sense
Inputs
1 to 8
Primary
Only
Primary MRC88 Controller/Amplifier
From A/V loopthroughs on Primary Controller
Sources 1 through 8
To IR Emitters
at A/V
Equipment
Expansion Cable
from Primary
to Secondary
Controller
Secondary MRC88 Controller/Amplifier
Figure 42: Expanded Controller Connections
© 2003 Xantech Corporation
