Harman-Kardon AVR 435 owner manual Rear Panel Connections, Digital Audio Outputs: Connect these

Rear Panel Connections

~230V/50Hz

230 V/50Hz

AM Antenna

FM Antenna

Tape Inputs

Tape Outputs

Subwoofer Output

DVD Audio Inputs

CD Inputs

Multiroom Outputs

A-BUS Connector

8-Channel Direct Inputs

Digital Audio Outputs

Video Monitor Outputs

DVD Video Inputs

Front Speaker Outputs

Center Speaker Outputs

Surround Speaker Outputs	Optical Digital Inputs
Switched AC Accessory Outlet	Coaxial Digital Inputs
Unswitched AC Accessory Outlet	Video 2 Audio Outputs
AC Power Cord Jack	Video 2 Audio Inputs
Video 2 Component Video Inputs	Video 3 Audio Inputs
Component Video Outputs	Video 1 Audio Inputs
Video 1 Component Video Inputs	Video 1 Audio Outputs
Remote IR Output	Preamp Outputs
Remote IR Input	Surround Back/Multiroom Speaker Outputs
Multiroom IR Input	RS-232 Port
Video 1 Video Outputs	Fan Vents
Video 1 Video Inputs	DVD Component Video Inputs
Video 2 Video Outputs	Remote IR Carrier Output
Video 3 Video Inputs
Video 2 Video Inputs

NOTE: To assist in making the correct connec- tions for multichannel input/output and speaker connections, all connection jacks and terminals have been color coded in conformance with the latest CEA standards as follows:

Front Left:	White
Front Right:	Red
Center:	Green
Surround Left:	Blue
Surround Right:	Gray
Surround Back Left:	Brown
Surround Back Right:	Tan
Subwoofer (LFE):	Purple
Digital Audio:	Orange
Composite Video:	Yellow
Component Video “Y”:	Green
Component Video “Pr”:	Red
Component Video “Pb”:	Blue

AM Antenna: Connect the AM loop antenna supplied with the receiver to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna.

FM Antenna: Connect the supplied indoor or an optional external FM antenna to this terminal.

Tape Inputs: Connect these jacks to the PLAY/OUT jacks of an audio recorder.

Tape Outputs: Connect these jacks to the RECORD/INPUT jacks of an audio recorder.

Subwoofer Output: Connect this jack to the line-level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input.

DVD Audio Inputs: Connect these jacks to the analog audio jacks on a DVD or other audio or video source.

CD Inputs: Connect these jacks to the analog output of a compact disc player or CD changer or any other audio source.

Multiroom Outputs: Connect these jacks to an optional audio power amplifier to listen to the source selected by the multiroom system in a remote room.

A-BUS Connector: Connect this jack to an optional A-BUS-certified remote room keypad or amplifier to extend the multiroom capabilities of your AVR. See page 18 for more information on A-BUS.

8-Channel Direct Inputs: These jacks are used for connection to source devices such as DVD-Audio or SACD players with discrete analog outputs. Depending on the source device in use, all eight jacks may be used, though in many cases only connections to the front left/right, center, surround left/right and LFE (subwoofer input) jacks will be used for standard 5.1 audio signals.

Digital Audio Outputs: Connect these

jacks to the matching digital input connector on

adigital recorder such as a CD-R or MiniDisc recorder.

REAR PANEL CONNECTIONS 7