Specifications5
Installation Options: |
| Features: |
•Freestanding Stove
•Residential or Mobile Home
•Horizontal or Vertical Vent
•Ember Fyre ™ Burner for "Wood Fire" Look
•Works During Power Outages
•Optional Thermostat or Remote Control
•
•Optional Blower
Heating Specifications:
Approximate Heating Capacity (in square feet)* | 500 to 1,500 With Blower, 500 to 1200 Without |
Maximum BTU Input Per Hour | 31,000 (NG & LP) |
Minimum BTU Output on Low (with blowers on) | 16,000 (NG) 20,100 (LP) |
Steady State Efficiency | up to 86.1 % |
AFUE | up to 67.2% |
*Heating capacity will vary depending on the home’s floor plan, degree of insulation, and the outside temperature.
**Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent of installed system. To measure the net BTU’s, multiply the BTU input by the efficiency percentage.
Dimensions:6"
The starter section is
Measure | 3/8" above the top. |
Clearances from
the Stove Top
Weight: 175 Lbs
Fuel:
28"
This heater is shipped in natural gas (NG) configuration but may be converted to propane (LP) using the included LP conversion kit. The sticker on top of the gas control valve will verify the correct fuel.
Electrical Specifications
Electrical Rating (with optional blower) | 115 Volts, 0.8 Amps, 60 Hz (92 watts on high) |
Travis Industries | 4 1 2 2 1 0 4 | 9 3 5 0 8 1 1 7 |
