Heater Placement Requirements

Installation (for qualified installers only)

•Heater must be installed on a level surface capable of supporting the heater and vent

•Due to the high temperature of the heater, it should be located out of traffic and away from furniture and draperies.

?When placed in a location where the floor to ceiling height is under 7 feet, the installation is considered an alcove and must meet the following requirements:

•The alcove floor to ceiling height must be at least 60” tall

•The alcove must not be more than 48” deep before the ceiling returns to 7’

•The alcove must be at least 42-1/2” wide

•The heater must not be placed so the vents below or above the door, along the sides of heater, or along the back of the heater can become blocked.

•This heater may be placed in a bedroom. Please be aware of the large amount of heat this appliance produces when determining a location.

Floor Protection Requirements

•When the stove is installed directly on carpeting, vinyl or other combustible material other than wood flooring or a high pressure laminate wood floor, the stove must be installed on a metal or wood protection panel extending the full width and depth of the heater (Minimum 22-1/2” wide by 17-5/8” deep).

Gas Line Installation

!The gas line must be installed in accordance with all local codes, if any; if not, follow current ANSI Z223.1 or NFPA 54 in the USA and the current CGA B149 in Canada.

!The heater and gas control valve must be disconnected from the gas supply piping during any pressure testing of that system at test pressures in excess of 1/2 psig (3.45 kPA). For pressures under 1/2 psig (3.45 kPA), isolate the gas supply piping by closing the manual shutoff valve.

•This heater is designed for natural gas but can be converted to propane. Check the sticker on the top of the gas control valve to make sure the correct fuel is used.

•Leak test all gas line joints and the gas control valve prior to and after starting the heater.

•The gas inlet accepts a 3/8” F.P.T. Fitting

•The location of the gas inlet is shown below

•A manual shutoff valve is required for installation (it must be located within 3’ of the heater). T-Handle gas cocks are required in Massachusetts in compliance with code 248CMR.

•Installation must be performed by a qualified installer, service agency or the gas supplier (In Massachusetts a licensed plumber/gasfitter).

Gas Inlet Pressure

From

Front of

Heater

2-1/2”

The Gas Inlet is Centered on the Heater

•With the heater off, the inlet pressure must meet the requirements listed in the table below?

If the pressure is not sufficient, make sure the piping used is large enough and the total gas load for the residence does not exceed the amount supplied.

?The supply regulator (the regulator that attaches directly to the residence inlet or to the propane tank) should supply gas at the suggested input pressure listed below. Contact the local gas supplier if the regulator is at an improper pressure.

	Standard Input Pressure

Natural Gas	7” W.C. (1.74 Kpa)

Propane	13” W.C. (3.23 Kpa)

Travis Industries

4 1 2 2 1 0 4

9 3 5 0 8 1 1 7

Cedar EF specifications

The Avalon Stoves Cedar EF is a stunning example of modern wood burning technology, designed to combine efficiency, performance, and aesthetic appeal. This stove is perfect for anyone looking to enhance their home with both heat and style, bringing the warmth of a real fire to living spaces while keeping energy costs in check.

At the heart of the Cedar EF is its advanced combustion technology. The stove features a clean-burning design that ensures maximum efficiency and minimal emissions. With an EPA-certified efficiency rating, the Cedar EF produces a remarkable amount of heat from a small amount of wood, making it an environmentally friendly choice as well. This is particularly vital in today’s eco-conscious market, where reduced emissions are paramount.

One of the main features of the Avalon Cedar EF is its large viewing window, which is framed with elegant cast iron. This window not only provides a beautiful view of the flames but also allows for great heat output. The high-efficiency design ensures that heat is radiated effectively into the room. Additionally, the stove’s unique air wash system keeps the glass clean, ensuring an unobstructed view of the fire.

The Cedar EF is equipped with a simple and convenient operation. The user-friendly air control lever allows for easy adjustments to regulate the burn rate and heat output. This feature not only enhances comfort but also contributes to fuel efficiency by allowing users to tailor the fire’s intensity to their needs.

In terms of size, the Cedar EF is compact yet powerful, making it a great fit for a variety of spaces. It is designed to be installed in both traditional and contemporary homes, blending seamlessly with various decor styles. The stove’s sleek design is complemented by a variety of options for finishes, including classic black, strapping it into a modern aesthetic.

For added versatility, the Avalon Cedar EF is designed to be a versatile heating solution and can be installed as a freestanding model or in an alcove. This flexibility allows homeowners to configure their heating sources according to their space.

Durability is also a key characteristic of the Cedar EF. Constructed from high-quality materials, this stove ensures longevity and consistent performance over time. Its robust design means that it can withstand the rigors of consistent use, delivering reliable warmth for years to come.

In summary, the Avalon Cedar EF combines cutting-edge technology with elegance and efficiency, making it a top choice for homeowners looking to add a cozy and stylish heating solution to their home. From its advanced clean-burning technology to its stunning design, the Cedar EF stands out as a leader in the wood stove market.

Avalon Stoves Cedar EF manual Heater Placement Requirements, Floor Protection Requirements

Models: Cedar EF