20 Installation (for qualified installers only)
Log Set and Coal Installation
Step | 1 | Before installing the log set, make sure the burner is seated correctly. |
|
| Remove the burner following the directions on page 31. Replace the |
|
| burner making sure it is seated correctly (see page 31). |
Step | 2 |
|
a | Place the rear log on the two |
platforms at the rear of the | |
| firebox. |
These pins
insert into the 
holes in the log.
Place the left and right twig. b The pins (or bolts) on the
burner insert into the holes on the logs.
When in place, the logs should look like this.
c | Place the embers over the front |
and side edges of the burner | |
| (do not place them over the |
| burner holes). Placed them in |
| a random pattern. |
On newer untis, an ember chunk is included with the heater (instead
d of cast into the burner). Place it in the location shown (it should not cover any burner holes).
Travis Industries | 4 1 2 2 1 0 4 | 9 3 5 0 8 1 1 7 |
