Operation23
Starting the Heater for the First Time
Cleaning Gold Surfaces
Fingerprints or other marks left on gold surfaces may become etched in place if they are not wiped clean prior to turning the stove on. With the heater cool, clean gold surfaces with denatured alcohol and a soft cloth.
Fumes from the Painted Surfaces Curing
Burn the heater at a medium setting for approximately one hour the first time. This will cure the painted surfaces. Fumes from the paint curing and oil burning off the steel may occur. This is normal. We recommend you open the window to vent the room.
Condensation
Water may appear on the glass each time you start the heater - this is normal.
Blue Flames
The flames will be blue when first started. After fifteen minutes the flames will turn a more realistic yellow and orange color.
Turning the Heater On and Off
After the pilot has been started...
O |
|
N |
|
O |
|
F | F |
|
Use this switch to turn the main burner on and off manually.
See the instructions included with the remote for details on operation.
| °F |
°F |
|
TEMP | |
ROOM | OFF |
See the instructions | o |
A | |
| t |
| u |
included with the |
|
remote for changing |
|
the battery. |
|
For systems with wall thermostats, use this switch to control the temperature (right is hotter, left cooler). Some systems require the on/off switch to be on.
Warning: Do not place combustible items on top or directly in front of the heater, even temporarily. The optional thermostat may start the heater causing a combustible item to ignite.
N o t e : If the heater turns on and off frequently while using the thermostat, you may want to adjust the flame height down until it produces just enough heat needed.
Adjusting the Flame Height
Your heater has an adjustable flame to tailor the look and heat output to your specific needs. It is adjusted by turning the middle dial on the gas control valve.
Flame Height Adjustment Knob
Index Mark
Turn
Travis Industries | 4 1 2 2 1 0 4 | 9 3 5 0 8 1 1 7 |
