Avalon Stoves Cedar EF Installation Addenda, Addendum #2 Interior Masonry Chimney Conversions

Installation Addenda 39

ADDENDUM #2 Interior Masonry Chimney Conversions

Interior Masonry Chimney

• Follow the requirements and

use the equipment listed in

the illustration to the right to

install this appliance into an

interior masonry chimney.

• Maximum vertical rise is 40'

• Minimum vertical rise is 10'

• See the chart on page 14 for

determining the correct

The entire chimney system must be air-tight. Make sure to seal the flashing, clean-out, and thimble connection, and to inspect the chimney.

Make sure the coaxial pipe maintains a 1” clearance to any combustible. The vent must be sealed air-tight.

#991 High Wind

Termination

Flashing (included in

#934 Masonry

Conversion Kit

High-Temp

Silicone .

restrictor position.

NOTE: these restrictor

positions are based upon lab

tests. The ideal restrictor

position may vary slightly

#990 90° Elbow	#711 Flex Liner (4” dia.)
	(or other UL 1777 Gas
	Liner)

Co-Axial Straight

Lengths

Connector with Cover

(included in #934 Masonry

Conversion Kit)

Standard Masonry Fireplace

The entire chimney system must be air-tight. Seal the connector cover and inspect the chimney.

. -Temp HighSilicone

Make sure the coaxial pipe maintains a 1” clearance to any combustible. The vent must be sealed air-tight.

#991 High Wind

Termination

Flashing (included in

#934 Masonry

Conversion Kit)

#711 Flex Liner (4” dia.)

(or other UL 1777 Gas Liner)

Connector (included in #934 Masonry Conversion Kit) secured and sealed to block-off plate.

Travis Industries 4 1 2 2 1 0 4 9 3 5 0 8 1 1 7