4.Installation Instruction
Please follow the reference sections in order for installation
4-1 Installation of Power Supply
To facilitate the installation, it is recommended to place the chassis upright on the table.
Required Tools: Power supply securing screw x 4; Cross screwdriver.
4-1.1 Remove side panel (see step 1-3.1 on page 5). Place the power supply into the power supply bay.
4-1.2 Use the 4 x securing screws to secure the power supply to the rear of the chassis.
4-2 Installation of Motherboard
The iSolo 230 can support ATX / Micro ATX / Flex-ATX motherboards. Please confirm the dimension and specifications of the motherboard before installation.
Required Tools: Cross screwdriver, Copper stand offs x 9 and Motherboard screws x 9.
4-2.1 According to the motherboard specifications, select the proper screw holes. First screw the copper stand offs into the corresponding holes of the chassis.
4-2.2 Install the motherboard rear I/O panel (supplied by the motherboard manufacturer).
