English
4-6 Installation of 5.25” Front Device Bay
4-6.1 Detach the front panel (see step 1-3.2 on page 5) and remove the mesh drive rail from the front panel.
4-6.2 Remove the front EMI plate and attach the front panel onto the chassis.
4-6.3 Slide the 5.25” device into the drive bay from the front of the chassis.
4-6.4 Secure the 5.25” device with the internal latch. Refer to the figure for installation procedure.
4-7 Installation of 3.5” Front Device Bay
Installation of 3.5” front device is the same as 5.25” front devices, please refer to step 4-6.
4-8 Installation of 3.5” Internal Device Bay
The iSolo 230 provides built-in bays to accommodate up to 3 hard disc drives. The internal device bays require securing runners, which can be found in the accessory box.
Required tools: Securing runners (2 per hard disc drive)
