Removing | the base | grille |
|
|
To remove the base | grille: | Condenser coils | Defrost pan | I |
|
|
|
|
1.Open the refrigerator door.
2.Grasp the grille with both hands.
3.Push down on the top edge of the grille to release the top clips.
4.Tilt the grille toward you to release the bottom clips.
5.Pull grille away from the refrigerator.
NOTE: Do not remove the Tech Sheet fastened behind the grille.
To replace the base grille:
1.Line up the edges of the grille with the outside edges of the cabinet.
2.Roll the grille toward you.
3.Place lower clips in the openings in the metal panel.
4.Roll the grille toward the cabinet until the top clips snap into place.
5.Close the refrigerator door.
See cleaning instructions for defrost pan and condenser coils on page 17.
Changing the light bulb
u4
*
Electrical Shock Hazard
Disconnect the refrigerator from the power supply before changing light bulb or remov- ing light shield for cleaning.
Failure to do so can result in death or electri- cal shock.
To change refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind Control Panel to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
14