Door Features

Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the cover or in the "Assistance or Service" section.

Door Rails

The door rails may be removed for easier cleaning.

Snap-on Door Rails

To remove and replace the rails:

1.Remove the rails by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the rail.

2.Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and rail assembly onto the tabs above the shelf as shown.

Drop-in Door Rails

To remove and replace the rails:

1.Remove the rails by pulling straight up on each end of the rail.

2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.

Door Bins

(on somemodels)

To remove and replace the bins:

1.Remove the bin by lifting it up and pulling it straight out.

2.Replace the bin by sliding it in above the desired support and pushing it down until it stops.

Can Rack

(on some models -Accessory)

To remove and replace the rack:

1.Remove the rack by lifting it up and pulling straight out.

2.Replace the rack by holding it above the desired support and pushing the rack back and down until it stops.

Adjustable Utility Compartment & Tray

(on some models)

The utility compartment and tray slide from one side to the other for more flexible storage. The tray fits on either side of the utility compartment or partially underneath it. Try moving it to different positions to find the option that works best for you.

To install the utility compartment and tray:

1.Insert the front of the utility tray into the slot on the back of the shelf rail. Lower the back of the tray into position.

2.Place the front of the utility compartment on top of the shelf rail. Lower the back of the compartment onto the ribs on the refrigerator door.

To adjust the utility compartment or tray:

1.Lift the front slightly and slide to desired position.

2.Lower front to lock into place.

Flip-up Door Shelf

(on some models)

The shelf bottom flips up so you can store taller items in the door shelf below. When in the down position, the shelf is strong enough to hold up to 10 pounds (4.5 kg).