Whirlpool WFG111SV, WFG110AV dimensions Freestanding Gas Range, Product Model Numbers

®

30" Freestanding Gas Range

PRODUCT MODEL NUMBERS

SF110AXS WFG110AV

WFG111SV

Gas supply: Use 3/4" rigid pipe gas supply line to the range location. A smaller size pipe on long runs may result in insufficient gas supply. With L.P. gas, piping or tubing size can be 1/2" minimum. If local codes permit, it is recommended that new flexible metal tubing, design-certified by CSA, 1/2-inch or 3/4-inch I.D., be used for connecting the range to the rigid gas supply line. A 1/2" male pipe thread is needed for connection to pressure regulator female pipe threads. An individual manual shutoff valve must be located in the same room, but external to the range.

Electrical: A 120-volt, 60 Hz, AC-only, 15 amp, electrical supply fused on both sides of the line. A separate circuit is recommended. A time-delay fuse or circuit breaker is recommended.

CABINET OPENING DIMENSIONS

OVERALL DIMENSIONS

26-3/4" (67.9 cm)

depth with handle

36"

(91.4 cm)

cooktop

height

46-1/4" (117.5 cm) overall height for tall backguard models

24-1/4" (61.6 cm)

29-7/8" (75.9 cm)

width

13" (33.0 cm) max. upper cabinet depth

18" (45.7 cm) min. clearance upper side cabinet to countertop

30" (76.2 cm) min. cabinet opening width

30-1/8" (76.5 cm) opening width

2" (5.1 cm) min. countertop space to side wall or other combustible material

For minimum clearance to top of cooktop, see NOTE.***

This shaded area recommended for electrical outlet.

Contact a qualified floor covering installer to check that the floor covering can withstand at least 200°F.

Use an insulated pad or 1/4" (6.4 mm) plywood under range if installing range over carpeting.

		This shaded area	Do Not seal the range to
		recommended	the side cabinets.
		for installation of
		gas pipe.	If cabinet depth is greater
			than 24" (61.0 cm), oven
			frame must extend
			beyond cabinet fronts by
	10"
			1/2" (1. 3 cm) min.
24"
	(25.4 cm)

(61 cm)

				8"
			5"	(20.3 cm)
		2"	(12.7 cm)
	5"	(5.1 cm)		*** NOTE: 24" (61.0 cm) min. when bottom of wood or metal cabinet is
3"				protected by not less than 1/4" (6.4 mm) flame retardant millboard
	(12.7 cm)
(7.6 cm)				covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm)

stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10032070B
Instructions packed with product. Specifications subject to change without notice.	07-15-08