Whirlpool GH7208XR manual Manual Cooking, Add 30 Seconds, Microwave Time/Power Cooking

MANUAL COOKING

Add 30 Seconds

The ADD 30 SEC. control automatically starts the oven at 100% power for 30 seconds, and adds 30 seconds of cook time, up to 10 minutes, with each additional touch of the control. Time may be added in 30-second increments by touching ADD 30 SEC., or by minutes and seconds using the interactive touch screen display. Cook power or cook time may be changed after cooking begins by using the “Adjust Settings” control. While settings are being adjusted, the countdown freezes, and then resumes when adjustments are made.

Microwave Time/Power Cooking

The MICROWAVE TIME/POWER control is for manual microwave-only cooking.

To Use MICROWAVE TIME/POWER:

1.Touch MICROWAVE TIME/POWER control pad.

2.Touch “+” or “-” controls, or use number pads to enter the cook time in minutes and seconds.

If using 100% cooking power, skip Step 3.

3.Touch “Power: 100%,” and then use “+” or “-” controls, or use number pad to adjust the power level, between 10% and 100%.

4.Touch “Start” on the touch screen, or START control. The display will count down the cook time.

During the countdown, cook time and/or cooking power may be changed by touching “Adjust Settings” on the touch screen, and following the prompts.

When the cycle ends, the end-of-cycle tones will sound, followed by reminder tones.

5.Touch CANCEL control or open the door to stop reminder tones. The display will return to the Main Menu after CANCEL control is touched.

Convect Time/Temp Cooking

The CONVECT TIME/TEMP control is for manual convection or combination cooking.

The cook time may be set in hours and minutes. The temperature may be set to 100°F (38°C), or from 225°F (107°C) to 450°F (232°C) in 5-degree increments.

NOTE: The microwave cooking power may be set to 0%, 10%, 20% or 30%. The default power is 0%.

To Use:

1.Touch CONVECT TIME/TEMP control.

2.Touch “+” or “-” controls, or use number pads to enter the cook time in hours and minutes.

3.Touch “Temp: 350°,” and then use “+” or “-” controls, or number pads to enter temperature, if cooking at a temperature other than the default 350°F (177°C).

4.Touch “Power: 0%,” and then use “+” or “-” controls, or touch number pad to set microwave cooking power, if cooking at a power level other than 0% (10%, 20% or 30%).

5.Touch “Start Preheat” on the touch screen to preheat empty oven. If preheat is not needed, touch “Skip Preheat” after the oven starts.

The display will count down the cook time.

During the countdown, cook time, temperature and/or cooking power may be changed by touching “Adjust Settings” on the touch screen, and adjusting the remaining time and/or the cooking power.

When the cycle ends, the end-of-cycle tones will sound, followed by reminder tones.

6.Touch CANCEL control or open the door to stop reminder tones. The display will return to the Main Menu after CANCEL control is touched.

Time/Temp/Power Cooking

The Time/Temp Power control on the Main Menu is for manual cooking by cooking method. There are 12 methods from which to choose. Some of the methods have set power levels that cannot be changed. Use the following chart as a guide.

METHOD	COOK	COOKWARE	POWER/TEMP
	WITH		SETTINGS
Reheat	Microwaves	Microwavable	10-100%; 100%
	only		default
Defrost	Microwaves	Microwavable	20% only
	only
Cook	Microwaves	Microwavable	10-100%; 100%
	only		default
Bake	Convection	Ovenproof,	100°F (38°C),
	only	convection	225° (107°C)-
		rack	450°F (232°C);
			350°F (177°C)
			default
Grill	Grill and	Ovenproof,	0-40%; 0%
	microwaves	microwavable,	default
		grill rack,
		Sizzle Pan
Melt	Microwaves	Microwavable	30% only
	only
Roast	Convection,	Ovenproof,	225°F (107°C)-
	microwaves	microwavable,	450°F (232°C);
		convection	350°F (177°C)
		rack, Sizzle	default
		Pan	0-30%; 0%
			default
Simmer	Microwaves	Microwavable;	Enter desired
Cook	only	SUREMIST™	time.
		steamer
		vessel
Sizzle Pan	Microwaves	Sizzle Pan	100% only
	only

18