Whirlpool WU3OOOX Cycles and options Model WU565OX, Energy Saver Dry option, Heavy Wash cycle

Cycles and options (Model WU565OX)

Pots & Pans cycle Rinse & Hold cycle

A double wash where water is heated during the first wash and rinse for maximum cleaning of cooked-on or baked-on foods.

Push the POTS& PANSCycle Selector Button and select the mark next to POTS

&PANSwith the Cycle Control Knob. The cycle sequence will be:

For rinsing a few items to be washed one or more days later.

Select the mark next to RINSE& HOLD with the Cycle Control Knob. Push the ENERGYSAVERDRYOption Selector Button. Using the Heat Dry option may cause food to bake on dishes. The cycle sequence will be:

Wash+Rins.e+Rmse+Wash+Rinse+Rinse+ Rinse+Rinse+Off
Rinse-+Dry+Off	Energy Saver Dry option
Heavy Wash cycle
	Air in the dishwasher is automatically
A double wash for heavily soiled loads.	heated during the “dry”part of all
Push the HEAVY WASHCycle Selector	cycles.
	If the ENERGYSAVERDRYOption
Button. Select the mark next to HEAVY
WASHwith the Cycle Control Knob. The	Selector Button is pushed, air in the
cycle sequence will be:	dishwasher is not heated. Using this
Wash-Rinse+Rinse-+Wash+~Rinse+	option helps save energy, but dishes
	take longer to dry (overnight) and some
Rinse+Dry-+Off
	water spotting may result. Someitems
Normal Wash cycle	(such as plastics) may need towel
A double wash for normal, everyday	drying.
	For best drying results, use a liquid rinse
loads. (The Energy Guide Label data is
based on this cycle.)	agent.
Push the NORMAL Cycle Selector Button	Hi-Temp Washing option
and select the mark next to NORMAL	When the I-II-TEMP WASHINGOption
WASHwith the Cycle Control Knob. The	Selector Button is pushed, water is
cycle sequence will be:
	heated during the first wash in the
Wash+Rinse+Wash+Rinse+Rinse+	Heavy Wash cycle and the final rinse in
Rinse+Dry+Off	all cycles.

Light Wash cycle

A single wash for pre-rinsed or lightly soiled loads.

Push the LIGHT WASHCycle Selector Button and select the mark next to LIGHT WASHand with the Cycle Control Knob. The cycle sequence will be:

Rinse+Wash+inse+RRinse+Dry+Off

Using DELAY HOURS

1.Push desired Cycle Selector Button.

2.Push desired Option Selector Buttons.

3.Turn Cycle Control Knob clockwise to the number of hours you want the dishwasher to delay before the selected cycle starts.

4.Close and latch the door.

NOTE:

. You can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.

a The Light Wash cycle can not be delayed.

Page 5