Connector Sleeve NUT Water Valve Tube | Whirlpool ECKMF-281 guide

Connect Ice-Maker

To Water (Contd.)

1.Find a %-inch to 1-inch vertical COLD water pipe near the refrigerator. (Horizontal pipe will work.. but extra precautions must be taken.) (See ’ in Step 4.)

2.Measure from inlet on rear of refrigerator to water pipe. Add 7 feet to allow for moving refrigerator for cleaning. This is the length of %-inch O.D. copper tubing you will need for the job (length from inlet tube to water pipe PLUS 7 feet). Be sure both ends of copper tubing are cut square.

3.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

4.Using a grounded drill, drill a 3/16-inch hole in the vertical cold water pipe you have selected.

Some water almost always remains in pipes. If it enters the drill, it can cause lethal shock. BE SURE YOUR DRILL IS GROUNDED.

Fasten a separate ground wire from drill to a good ground that complies to local electrical codes. (If in doubt, consult a licensed electrician.) UNLESS PROPER GROUNDING IS FOLLOWED, YOU ARE NOT PROTECTED AGAINSTSEVERE OR LETHAL SHOCK.

l If you must use a horizontal pipe, take extra precautions:

Drill on the top or side of the pipe, not bottom. This helps keep water away from the drill. Also, it keeps normal sediment from collecting in the valve.

5.Fasten shutoff valve to cold water pipe with pipe clamp. Be sureinlet end is solidly in the 3/16-inch drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight connection. Do not overtighten or you may crush copper tubing, especially if soft copper tubing is used. Now you are ready to connect the copper tubing.

6.Slip compression nut and compression sleeve on copper tubing as shown in diagram. Insert end of tubing into out/et end squarely as far as it will go. Screw compression nut to outlet end with adjustable wrench. Do not overtighten. Turn ON main water supply and flush out tubing until water is clear. Turn OFF shutoff valve on the water pipe. You are now ready to connect other end of %-inch copper tubing to inlet tube or water valve on back of refrigerator.

7.Assemble compression nuts on tubing as shown in diagram. Insert ends of tubing into connector and tighten compression nuts. Be sure ends of tubing are squarely in connector as far as they will go. Do not over-tighten.

‘/!I” TUBE TO SHUTOFF VALVE

CONNECTOR

SLEEVE

NUT

WATER VALVE TUBE

Step 7

8.Turn shutoff valve on. TIGHTEN ANY CONNEC-

TIONS OR NUTS THAT LEAK.

9.Copper tubing may now be fastened to baseboard.

10.The Ice Maker has a built-in water strainer on the inlet side of the water valve. Use a second water strainer when local water conditions require periodic cleaning or a well is your source of water. The strainer can be installed in the X-inch water line.

11.Water pressure should not be below (15 P.S.I.) or above (125 P.S.I.). If problem occurs call your Utility Company.

12.PLUG IN YOUR REFRIGERATOR.

When you have your first batch of ice you may throw away extra parts.

IMPORTANT:

It may take up to 24 hours for your Ice Maker to begin producing ice crescents.

To enjoy your Ice Maker most PLEASE READ CARE-

FULLY THE ICE MAKER SECTION OF YOUR USE AND CARE GUIDE.

ECKMF-281 specifications

The Whirlpool ECKMF-281 is an innovative and stylish kitchen appliance designed to simplify the process of creating delicious meals at home. This multifunctional kitchen tool combines the capabilities of a food processor, blender, and mixer, making it a versatile addition to any culinary setting.

One of the standout features of the ECKMF-281 is its powerful motor, which ensures efficient performance and consistent results. With various speed settings, users can easily adjust the intensity to suit different food preparation tasks, from chopping vegetables to blending smoothies. The appliance is equipped with sharp stainless steel blades that enable quick and precise cutting, making meal prep faster and easier.

Another notable technology incorporated into the ECKMF-281 is its ergonomic design. The appliance is user-friendly, with intuitive controls that allow even novice cooks to navigate its features with ease. The modern aesthetic, featuring a sleek finish and compact design, allows it to seamlessly fit into any kitchen décor without taking up too much counter space.

Additionally, the ECKMF-281 features a generous capacity, enabling users to prepare larger batches of food in one go, perfect for families or meal prepping. The bowl is crafted from high-quality, durable materials that are also easy to clean, making maintenance hassle-free. This model also comes with multiple attachments, including a mixing bowl, blender jug, and chopping bowl, catering to a variety of cooking needs and preferences.

Safety is a top priority for this model, as it includes built-in safety mechanisms to prevent accidents during operation. These features ensure that the appliance only operates when properly assembled, adding an extra layer of security for users.

In summary, the Whirlpool ECKMF-281 stands out for its powerful motor, versatile functionality, ergonomic design, generous capacity, and safety features. Whether you're an experienced home chef or just starting, this multifunctional appliance is sure to elevate your kitchen experience. Combining style, convenience, and efficiency, the ECKMF-281 is a superb choice for anyone looking to enhance their culinary skills and enjoy the art of cooking.