【】 | Whirlpool ADG 175 specs

Dishwasher must be level for proper dish rack operation and wash performance.

1Place level on door and rack track inside the tub as shown to check that the dishwasher is level.

2level the dishwasher by adjusting the four leveling legs individually.

3When level the dishwasher, please pay attention not to let the dishwasher tip over.

	【Figure 8】	Check
	【Figure 8】	Level
		Front
Illustration of feet adjustment		to Back

NOTE:

The maximum adjustment height of the feet is 60 mm.

Check level side to side

		for personal safety:
WARNING!		DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
WARNING!		DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING
		CONNECTION FROM THE POWER CORD.

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply. Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving only this appliance.

Ensure the voltage and frequency of the power being corresponds to

those on the rating plate. Only insert the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is not appropriate for the plug , replace the socket, rather than using a adaptors or the like as they could cause overheating and burns.

This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is installed and earthed in accordance with all local standards and requirements.

【Figure 8】