Changing a cycle or option setting
During the first minute of a cycle
1.Press new Cycle and/or Option pads.
2.Check the detergent dispensers. They must be filled properly for the new cycle,
After the first minute
of a cycle
1.Press Cancel/Drain. A
2.Press a new Cycle pad.
3.If desired, press one or more Option pad(s).
4.Check the detergent dispensers. They must be filled properly for the new cycle.
Adding an item during a cycle
You can add an item to the dishwasher anytime before the main wash portion of a cycle, See the "Setting the Controls" section,
1.Lift up the door latch to stop the cycle. Wait for spraying action to stop before opening the door.
2.Open the door and add the item.
3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher
to warm up. Doing so reduces the amount of moisture in the vent when
restarting a cycle.
4.Close the door firmly until it latches, The dishwasher resumes the cycle,
15