![](/images/new-backgrounds/1085780/8578017x1.webp)
GETTING TO KNOW YOUR MICROWAVE OVEN
14.TIMER OFF. Touch this pad to cancel the Minute Timer.
15.START/ENTER. Touch this pad to start a function. If you open the door after the oven begins to cook, touch START/ENTER again to restart oven.
16.OFF/CANCEL. Touch this pad to erase an incorrect command, cancel a program during cooking, or to clear the display.
17.LIGHT. Touch this pad to turn on the cooktop/countertop light.
18.FAN. Touch this pad to turn the fan on or off.
NOTES:
•If you have entered all settings for a function but do not touch START/ENTER within 5 seconds, the START indicator light will flash.
•If you open the door while the oven is on and then shut the door, the START indicator light will flash. Touch START/ENTER to restart the oven.
•If you choose a function but do not press another Command pad within 1 minute, the display returns to the time of day and you have to start over.
Audible signals
Audible signals are available to guide you when setting and using your oven:
•A programming tone will sound each time you touch a pad.
•One long tone signals the end of a Minute Timer countdown.
•Four tones signal the end of a cooking cycle.
•Two tones sound once every minute after an End-
•Three tones sound if you have made an incorrect entry.
To disable all audible signals:
•Touch and hold Number pad 1 for 4 seconds to disable all programming tones.
To turn all signals back on:
Repeat step under “To disable all audible signals” above.
NOTE: Three tones, followed by two tones, will sound when audible signals are turned on or off. The three tones will be omitted if all tones are disabled.
Interrupting cooking
You can stop the oven during a cycle by opening the door. The oven stops heating and the fan stops, but the light stays on.
To restart cooking, close the door and touch
START/ENTER.
If you do not want to continue cooking:
•Close the door and the light goes off.
OR
•Touch OFF/CANCEL.
Using the Child Lock
The Child Lock locks the control panel so children cannot use the microwave oven when you do not want them to.
To lock the control panel:
Touch and hold START/ENTER for 4 seconds. Three tones, followed by 2 tones, will sound and “LOC” will appear on the display.
To unlock the control panel:
Touch and hold START/ENTER for 4 seconds. Two tones will sound and “LOC” will be cleared from the display.
Using the Demo/Learning feature
You can see your microwave oven’s functions without turning the oven on.
Note: This feature can only be used when the microwave oven is first connected to power. You cannot use the Demo/Learning feature after a Command pad has been touched.
To set the Demo/Learning feature:
1. Open the door and keep it open.
2. Touch and hold Number pad 0 for 4 seconds. Three tones, followed by two tones, will sound.
3. Release Number pad 0.
4. Shut the door to start the Demo/Learning feature.
To cancel the Demo/Learning feature:
Touch OFF/CANCEL.
9