| GETTING TO KNOW YOUR MICROWAVE OVEN | |||
MICROWAVE OVEN FEATURES |
|
|
|
|
1 | 11 | 10 |
|
|
|
|
|
| 9 |
|
| SENSOR AUTO REHEAT DEFROST | 1 2 3 | |
|
| ENTER COOK TIMER SIM |
| |
|
|
|
| POWER |
|
| QTY TURN TABLE OFF | LBSOZ START? | |
AUTO |
| AUTO |
| AUTO |
|
REHEAT |
| DEFROST |
| COOK |
|
POPCORN | BEVERAGE |
| WARM | 8 | |
| HOLD | ||||
COOK |
| COOK |
| ADD | |
TIME |
| POWER |
| MINUTE |
|
1 | 2 | 3 | 4 | 5 |
|
6 | 7 | 8 | 9 | 0 |
|
CLOCK |
| TIMER |
| TIMER |
|
| SET |
| OFF |
| |
START | OFF |
|
| ||
LIGHT | VENT FAN |
| |||
2
3
45
7
65
Your microwave oven is designed to make your cooking experience as enjoyable and productive as possible. To help get you up and running quickly, the following is a list of the oven’s basic features:
1.Door Handle. Pull to open door.
2.Door Safety Lock System. The oven will not operate unless the door is securely closed.
3.Window with Metal Shield. Shield prevents microwaves from escaping. It is designed as a screen to allow you to view food as it cooks.
4.Glass Turntable (PN 4393751) (not shown). Included in oven cavity – see below for installa- tion instructions. This turntable turns food as it cooks for more even cooking. It must be in the oven during operation for best cooking results. The turntable is sunken into the cavity floor to give you more cooking space and better cooking results. See pages 9, 12, 33, 38, and 40 for more details.
5.Charcoal and Grease Filters. Included in oven cavity. See page 34 for installation instructions and cleaning information.
6.Cooktop/Countertop Light. Turn on to light your cooktop or countertop or turn on as a night light. See page 16 for more information.
7.Cooking Guide Label. Use as a quick reference for Auto Cook, Auto Reheat, Auto Defrost, Popcorn, and Beverage settings.
8.Exhaust Fan and Cooktop Light Switches. See page 16 for more information.
9.Control Panel. Touch the pads on this panel to perform all functions. See pages
10.Vent Grille.
11.Oven Cavity Light.
12.Microwave Inlet Cover.
13.Model and Serial Number Plate. See page 2 for more information.
To install turntable and support:
•Fit the hub (PN 4393754) onto the shaft. 
• Place the support
(PN 4393752) on the cavity bottom.
• Place the turntable on the hub. Make sure the raised, curved lines in the center of the turntable bottom are between the three “spokes” of the hub.
•The rollers (PN 4393753) on the support should fit inside the ridge on the bottom of the turntable.
•The turntable turns both clockwise and counter- clockwise. This is normal.
13