5 Check operation
A. Surface burners
1.Push in and turn the knob to “LITE” position.
2.When the burner lights, turn the knob clockwise to the desired setting. Do not leave the knob in the “LITE” position once the burner lights.
3.If the flame should go out during the cooking opera- tion, turn burner off. If gas has accumulated and a strong odor is detected, wait five minutes for odor to disappear. To relight burners repeat steps 1 and 2 above.
B. Oven burner
Turn the oven selector to “BAKE.” Turn the oven temperature control to a desired setting. The oven burner should automatically light in 50 to 60 seconds.
C. Broiler burner
Turn the oven selector to “BROIL.” Make sure the oven temperature is set on “BROIL.” The broiler burner should automatically light in 50 to 60 seconds.
D.Clock (if so equipped)
Refer to operating instructions in the Use and Care Guide (packed in the oven).
E. Cleaning
See the Use and Care Guide that was packed in the oven for proper care and cleaning instructions.
Before you call
R n
PJ for service l . .
See the Use and Care Guide for
Be sure power cord is plugged in
Be sure the gas supply is turned on.
Check for blown fuses or tripped circuit breaker.
If you must call for service. . .
You will need the appliance model and serial number. Find the serial plate at top center of the oven front frame.
11