Setting the clock
When the oven is first plugged in, the Display shows 88:88. If the electric power ever goes off, the Display will also show all 8’s when the power comes back on.
You can cook without setting the clock, but the display will be blank after cooking. The oven door must be closed before setting the clock.
DO THIS... | THIS HAPPENS... |
1. Touch CLOCK SET.
2.Touch Number Pads for the correct time of day.
3.Touch START.
The CLOCK SETSignal Light will come on. The Display will show a “01’Start touching number pads for the desired time within 5 seconds.
The Display will show what num- bers you touched in the order you touched them. This example shows 3125.
The Clock is set when the CLOCK SETSignal Light goes off
The Display will flash on and off if you have touched in an incorrect time such as12:65.
Cooking at high cook power
DO THIS... | THIS HAPPENS... |
1.Put food in the oven and close the door.
2.Touch COOK.
3.Touch Number Pads for the cooking time you want.
The COOK Signal Light will come
on and the Display will show four O’s
The Display will show the numbers you touched in the order you touched them. This example shows1 minute, 30 seconds.
6