Using your microwave oven
Microwave oven controls
There are three parts in the control section.
- Command Pads
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, the Display will show 88:88. If, after you set the Clock (page 6). the Display again shows all 8’s, it means your electricity was off for a while. Reset the Clock.
Digital display/clock and signal lights
Command pads
q.
When you are not using the microwave oven, this is an accu- rate digital clock. When you are using the microwave oven, this displays time and Cook Power settings, signal lights and shows you what Number Pads you touched.
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
oven to start. See
page13for information on the tone you hear when touching any pad.
Each Command Pad (except STARTand CANCEL] lights a Signal Light on the digital display. The Signal Light comes on when you touch the Command Pad.
While the oven is running, a Signal Light [or lights) will be on to show what the oven is doing.
Number pads
D p m EE$p&
the oven what you
- a time.
p m p