Using your microwave oven
Microwave oven controls
There ore three parts in the control section.
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, the Display will show 88:88. If, after you set the Clock (page 6), the Display again shows all 8’s, it means your electricity was off for a while. Reset the Clock.
Digital display/clock and signal lights
When you are not
Pads you touched.
Command pads
what order. A few examples:
oven to start. See
pagel6for information on the tone you hear when touching any pad.
Each Command Pad (except STARTand CANCEL] lights a Signal Light.The Signal Light comes on when you touch the Command Pad.
While the oven is running, a Signal Light (or lights) will be on to show what the oven is doing.