Whirlpool MW87OOXS manual Changing cook power, Touch Cook Power

Page 10

..

.a. m

4. Touch COOK POWER.

The COOK POWER Indicator Light will come on and the Display will show “P-HI:’This shows the oven is pre-

programmed to cook at full (HIGH) power.

The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.

5.Touch a Number Pad for the Cook Power you want.

	The COOK 1 and COOK POWER
	Indicator Lights will stay on to show
	that the oven is cooking in the first
6. Touch START.	cycle at a Cook Power other than
6. Touch START.	high.

The Display counts down the time to show how much cooking time is left in the first cycle.

For 2 of every 10 seconds, the Display will show the Cook Power you selected.

When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CAN- CEL.) “End” will remain on the Display and a beep will sound every 30 seconds (to remind you that food is left in the oven] until door is opened or CANCEL is touched. The Display will then show the time of day.

Changing cook power

The Cook Power can be changed any time before touching STARTor during the cycle

. Touch COOK POWER.

l Touch a number for the new Cook Power.

l Touch START.The cycle will cook at the new Cook Power for the original time.

l

l

OR...

Touch COOK POWER twice if you want to change a lower Cook Power to HIGH. Touch START.

10

Image 10

Contents Microwave Oven Contents Parts and featuresBefore you use your microwave oven Before you install your microwave ovenDoor bent SAW These Instructions Command pads Using your microwave ovenDigital display/clock and indicator iighk Microwave oven controlsSetting the clock Gramming toneCancelling the minute timer Using the minute TimerChanging the minute timer New instructions cancel the old onesCooking in your microwave oven Cookine in one cockChanging the cooking time Cooking at lower cook powersTouch Number Pads for the cooking time you want On next Touch Cook Power Changing cook powerTouch a Number Pad for the Cook Power you want Cooking in more than one cycle or more cook powers Put food in the oven and close the doorPage Auto Set Time Using Auto SETPut food in the oven and close the door On next Touch a Number pad for the Cook Power you want Touch Start DownCook Power of 70% is preset on Temp sefflngs Changing the pre-programmed settingAuto Set Temp Changing the pre-programmed selling Additional information DefrostingPut frozen food in the oven and close the door Changing or adding defrost time Standing time or cooking automatically affer defrostingAbout the Quickdefrost Cycle For cooklng automatically after defrostlngCooking with the Temperature Probe Hints for using the temperature probe DON’TCleaning the probe Changing the temperature settingRempemture probe cooking tips Put cooked, hot food in oven and close door Using Keep WarmTo automatically follow another cycle Touch KeepwarmUsing Auto Start Put food In oven and close the door. See Caution onPage Other operating hints To double check settings while the oven is runningTo stop the oven while it is running Inserting the tuck Cleaning the rackBi-level cooking rack Special cautionInstallation instructions Installing your microwave ovenWall Receptacle cl e Electrical requirementsObserve all governing codes and ordinances PowlzPP+Building in your microwave oven Replacing the light bulb Cleaning the microwave ovenCaring for your microwave oven To replaceHow your microwave oven works Operating safety precautions Never Cook or Reheat a Whole EGGKeep door closed l turn oven off General informationCool, do not use it For assistance CallingBefore If you need assistance?If you have a problem If you need serviceIf you need FSP’ replacement part Warranty