Changing the pre-programmed setting
You can change the
1.Place food in the oven and close the door.
2.Touch TIME twice.
3.Touch the Number Pads for the new desired cooking time. If high Cook Power is desired, skip to Step 6.
4.Touch COOK POWER.
5.Touch the Number Pad for the desired Cook Power.
6.Touch START,The oven will cook to the new cooking time at the Cook Power you selected. After the cooking is complete, the oven will remember that cooking time and Cook Power for future use. NOTE: If the elecfrlc power ever goes off, the oven will go back to the
Auto Set TEMP
Auto Set TEMP provides ten preset probe temperature settings. One hundred ten (110)to one hundred ninety (190) degrees at 70% cook power can be set by touching TEMP and
the corresponding number pad
A preset temperature of 165°F at HIGH cook power is available after inserting the probe, by touching just the TEMP pad. This temperature may be changed to any temperature from 90°F to 200°F allowing you to store your favorite cooking temperature and cook power. See page t6 for instructions.
DO THIS... | THIS HAPPENS... |
1. Put food in the oven and close the door.
2. Touch TEMP.
(Option: Skip to step 6 if you want to use the pre- set temperature and Cook Power.)
3.Touch a Number Pad for the new temperature you want from 110°Fto 190°F.
4. Touch COOK POWER. (Option: Skip to Step 6 if you want to cook at 70% power.)
The AUTO SETIndicator Lights will come on and the Display will show 165°F (or the tem- perature you have programmed as your favorite cycle). NOTE: HIGH Cook Power Is preset on fhls seftfng only.
The Display will show what you touched in degrees Fahrenheit. This example shows140”F NOTE:
Cook Power of 70% is preset on TEMP sefflngs 1-9.
The COOK POWER Indicator Light will come on and the Display
will show
continued on next page