Number Pads
Once you’ve touched a Command Pad to tell the oven what
you want to do, you’ll touch Number Pads to tell it...
-a time,
-a Cook Power,
-a food temperature,
-a food setting.
Audible Signals
Audible signals are available to guide you when setting and using your oven. A
programming tone will sound each time you touch a pad. Two beeps will sound between cycles. A reminder tone will sound every 60 seconds after cooking is done to remind you that something has been left in the oven. A 3 second tone signals the end of the Minute Timer function. If you don’t hear a tone, it is because of incorrectly entered instructions or because the tones have been removed. For example, a tone will not sound if you touch a Number Pad before you touch a Command Pad.
To remove the
programming tone:
1.Open the door.
2.Touch CANCEL twice, then touch START.
3.The programming tone will be cancelled.
To replace the
programming tone:
l Repeat the steps above.
To remove all tones, except the Minute Timer signal:
1.Open the door.
2.Touch CANCEL twice, touch 0, then touch
START.
3.All audible tones (except Minute Timer signal) will be cancelled.
To replace the tones:
l Repeat the steps above.
NOTE: If your electricity goes off, the audible signals will come back on. Repeat steps above if you want to remove them again.