Setup
or
Component video outputs (DVD)
Some TVs or monitors are equipped with component video inputs.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your TV and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to view the higher quality picture playback.
Progressive outputs (DVD)
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your TV and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to enjoy highest quality picture with less flicker.
Press the SETUP button and select Video Output to YUV. Connect the component video cable to TV, press the P. SCAN button on the remote control when DVD is stopped. "P. SCAN" display. You can select the output signal for better picture quality.
Attention:
•When progressive output is activated, there is no video signal output from
•Make sure your TV supports progressive scan component video signal, press the P. SCAN button repeatedly until "CVBS" is displayed to go back to CVBS video signal.
SPEAKER | IMP. 6 ohm |
| FM ANT. |
R I GH T | LE FT | 300Ω | |
FRONT REAR | REAR | FRONT |
|
SUBWOOFER | CENTER |
|
|
IMP. 6 ohm | IMP. 6 ohm |
|
|
To | To | To |
Y | PB/CB | PR/CR |
VIDEO | VIDEO | VIDEO |
OUT | OUT | OUT |
Component video cable (not supplied)
Audio cable | (white) | ÿþýüûúúýþùøú÷ø |
(not supplied) |
|
|
(red)
To Y VIDEO IN
To PB/CB VIDEO IN
To PR/CR VIDEO IN
or
Coaxial Antenna Jack
Some TVs do not have an RCA or
Notes :
•Connect the Unit to your TV directly. If you connect the Unit through a VCR, the playback picture will be distorted because DVD discs are copy protected.
•When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connection.
•Refer to the instruction manual of the connected equipment as well.
E - 11 | (continued to next page) |