The display language may be changed.
To Change Language:
1.Touch and hold number pad “0” for 3 seconds until 2 tones sound.
2.Touch number pad “1” for ENGLISH or “2” for FRENCH.
3.Touch START to set the language.
Start
The START pad begins any function. If it is not touched within
5 seconds after touching a pad, “PRESS START” will scroll in the display as a reminder. If START pad is not touched within
2 minutes after touching a pad, the display will return to the time of day mode and the programmed function will be canceled.
If cooking is interrupted by opening the door, touching START will resume the preset cycle.
Off Cancel
The OFF CANCEL pad stops most functions except for the Control Lock.
The microwave oven will also turn off when the door is opened. Close the door and touch START to resume the cycle.
Add 1 Minute
The ADD 1 MINUTE control automatically starts the microwave oven at 100% power for 1 minute, and adds 1 minute of cook time, up to 10 minutes, with each additional touch of the control.
Touching ADD 1 MINUTE during a manual cook cycle will add 1 minute of cook time at the current cook power.
Clock
This is a standard
To Set:
The microwave oven and timer must be off.
1.Touch CLOCK.
2.Touch the number pads to set the time of day.
3.Touch CLOCK or START.
To Remove:
1.Touch CLOCK.
2.Touch 0.
3.Touch CLOCK.
The time will disappear, and “:” will appear on the display.
Tones
Tones are audible signals, indicating the following:
One tone
■Valid entry (short tone)
Two tones
■End of stage in multistage cooking
■Control Lock active
■Hidden feature has been entered or exited
■Reminder, repeat each minute after the
Three tones
■Invalid entry
Four tones
■End of cycle
To Turn Off/On Valid Entry Tones: With the microwave oven in standby mode, touch and hold the number pad “1” for 3 seconds until 2 tones sound. Touch and hold number pad “1” to turn tones back on.
To Turn Off All Tones (except hidden feature tones): With the microwave oven in standby mode, touch and hold the number pad “2” for 3 seconds until 2 tones sound. Touch and hold number pad “2” to turn tones back on.
Control Lock
The Control Lock shuts down the control panel pads to prevent unintended use of the microwave oven.
When the control is locked, only the Vent Fan and Light pads will function. If any other control pad is touched, “LOCKED” will appear in the display and the invalid entry tones will sound.
To Lock/Unlock Control: The microwave oven must be in standby mode. Touch and hold OFF CANCEL for 3 seconds until 2 tones sound and a padlock icon appears in the display. Repeat to unlock and remove the padlock icon from display.
Vent Fan
The vent (exhaust) fan has 2 speeds: high and low.
To protect the microwave oven, if the temperature from the range or cooktop below the microwave oven gets too hot, the vent fan will automatically turn on at high speed. It may stay on for up to 1 hour to cool the microwave oven. When this occurs, the vent fan cannot be turned off. If the vent fan pad is touched during automatic fan operation, “AUTO FAN IS ON, FAN SPEED WILL REMAIN ON UNTIL HEAT IS NO LONGER SENSED” will scroll in the display as a reminder.
The vent fan is also the cooling fan, and will start at low speed when any cooking function begins. It will remain on until the cooking function ends.
To Turn Vent Fan On/Off: Touch VENT FAN pad once for high, twice for low or 3 times for off.
Cooktop Light
The cooktop light has 3 settings: high, low and off.
To Turn Light On/Off: Touch LIGHT pad once for high, twice for low or 3 times for off.
6