Whirlpool 721.663398 manual Easy USE Table

Page 11

B. EASY USE TABLE

(1)KITCHEN TIMER

1.Touch STOP/CLEAR.

2.Touch KITCHEN TIMER.

3.Touch correct number for time.

4.Touch START.

(2)CHILD LOCK

To set:

1.Touch STOP/CLEAR.

2.Touch “START” more than 4 seconds. To cancel:

1.Touch STOP/CLEAR.

2.Touch “START” more than 4 seconds.

(3)SENSOR COOK

1.Touch STOP/CLEAR.

2.Touch SENSOR COOK Category.

(4)ADD MINUTE

1.Touch STOP/CLEAR.

2.Touch ADD MINUTE.

(5)AUTO DEFROST

1.Touch STOP/CLEAR.

2.Touch AUTO DEFROST.

Three different defrosting levels are provided. (Touch 1 : Meat

Touch 2 : Poultry

Touch 3 : Fish)

3.Enter the weight of your food in decimal increments from 0.1 to 6.0 pounds.

4.Touch START

5.At beeping, turn food over.

6.After turning food over, touch START to resume defrosting.

(6)TIMED COOKING

1.Touch STOP/CLEAR.

2.Touch COOK TIME.

3.Touch number for cooking time.

4.Touch POWER.

5.Touch number for cooking power level.

6.Touch START.

(7)MULTI-STAGE COOKING

1.Touch STOP/CLEAR.

2.Touch COOK TIME.

3.Touch number for cooking time.

4.Touch POWER.

5.Touch number for cooking power level.

6.Repeat steps 2-5 to set 2nd cooking stage.

7.Touch START.

-10-

Image 11

Contents Division Basic Field Manual For Microwave Oven Page Foreword Test the Latch and Switch Sequence Adjustment ProceduresCheck the Door Latch and Switch Closing Adjust the Latch and Switch ClosingLatch Latch Board Trial Operation Precautions on InstallationFeatures and Specifications General Precautions in USESwitch Table Specifications Schematic Diagram Overall Circuit Diagram Matrix Circuit for Touch KEY Board Operating Procedures A. Oven Control Panel Easy USE Table Equipment Procedure for Measuring Microwave Energy LeakageMeasuring Microwave Energy Leakage Measurement with the Outer Case RemovedRecord Keeping and Notification After Measurement Power Output MeasurementMeasurement with a Fully Assembled Oven Important Notes Disassembly InstructionsDoor Assembly / Removal Magnetron Removal High Voltage Capacitor and Diode Removal FAN Motor Assembly / RemovalHigh Voltage Transformer Removal Removing Sensor Interlock Mechanism Interlock SystemComponents Test Procedure Results Primary Interlock Switch TestSecondary Interlock Switch Test Monitor Switch TestMagnetron Test and Checkout PROCEDURES, and TroubleshootingTest Procedures Components Filament Winding Primary TerminalDiode High VoltageCapacitor FAN Motor PowerRelay LevelProblems Causes Checkout ProceduresCheckout Procedures for Fuse Blowing YES Good Checkout Procedures for RelayProblem a Problem BPage Condition Cause Remedy Trouble ShootingResult ConditionCheck Fuse blows Condition Check Result Cause Remedy Condition Check ResultCause Remedy Check Result Exploded View Door Parts Controller Parts Oven Cavity Parts Latch Board Parts Interior Parts Base Plate Parts Sensor Parts No MFL30502909