Removing the crispers
To remove the crispers:
1.Slide the crisper straight out to the stop.
2.Lift the front.
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the cover:
1.Push up glass insert from the bottom, then slide il out with both hands.
2.Lift front of cover frame.
3.Pull cover frame up and out.
4.Remove metal cover support.
To replace the cover:
1.Replace metal cover support on wall supports in front section of cabinet.
2.Fit back corner of cover frame into notch supports on walls of refrigerator, then lower front onto metal cover support.
3.Slide back of glass insert into cover frame. Then lower front to level position.
and crisper cover
Pull out to the :op, lift the front and pull again.
Remove the glass insert. Lift front of cover t rame, then the back
Adjusting the crisper humidity control
You can conlrol the amount of humidity in the
l The control can be adjusted to any setting between LOW and HIGH.
l LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
l HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
Removing the freezer shelf
The upper freezer shelf can be removed for easier cleaning.
To remove the freezer shelf:
1.Lift front of shelf slightly.
2.Lift back off supports.
3.Replace in reverse order.