Using the optional automatic ice maker
If you have an automatic ice maker, or if you plan to add one later (contact dealer for ice maker kit number), there are a few things you will want to know:
l The ON/OFF lever is a wire signal arm. DOWN to make ice automatically
UP to shut off the ice maker IMPORTANT: Do not turn ice maker on until it is connected to the water supply.
instructions for ice maker water supply hook up are attached to the back of the refrigerator cabinet.
l The dial or lever on the side of the ice maker changes the size of the cubes.
l Good water quality is important for good ice quality. Try to avoid connecting the ice maker to a softened water supply. Water softener chemicals, such as salt from a malfunctioning softener, can damage the ice maker mold and lead to poor ice quality. If a softened water supply cannot be avoided, make sure that the water softener is well maintained and operating
proverb
up to stop ice
maker.
Down to
start ice
maker.
Solving common ice maker problems
PROBLEM
ice crescents attached at corners
Ice maker will not operate or ice is not made fast enough
POSSIBLE CAUSE/SOLUTION
l This is normal. They break apart easily. Shake bin occasion- ally to keep cubes separated.
l ON/OFF lever is in the OFF (up) position. Lower lever to the ON (down) position.
l Freezer is not cold enough. Adjust temperature controls and wait 24 hours. (See ‘Changing the control settings” on
paw 8.)
l New plumbing connections can cause discolored or off- flavored ice. Discard the first few batches of ice.
l Cubes are stored too long. Throw them away and make a new supply.
l Foods in freezer are not wrapped properly. See “Food Storage Guide” on pages 18 and 19.
l Freezer and ice bin need to be cleaned. See pages 15 and 16.
12