Whirlpool EV15HK manual Changing the light bulb, Removing the bottom basket, Key eject lock

Changing the light bulb...

Light Shield

I :I

I

II

WARNING: To avoid possible shocks, first unplug

freezer or turn off electricity leadlng to freezer at the main power supply.

1 Remove the light shield from the side of the control panel. Depress the bock of the shield to release the tabs, then pull away.

2.Replace bulb with a 40.watt appliance bulb.

3.Replace the light shield. Insert the shield tabs in the slots, then press the shield to snap into place

4.Plug in power cord or switch on electricity.

Removing the bottom basket...

To	remove:
1 Lift front of basket out of supports.		Lift the Front,
2.	Pull out
		Then Pull Out
To	replace:

1 PosItton bock of basket on the rear wall supports 2 Lower front Into place.

The key eject lock...

con heir, reduce the hazard of child entrapment

I

To lock or unlock the freezer you must hold the key in the lock while turning The lock IS spring loaded so the key cannot be left in the lock.

If the key IS lost, contact your WHIRLPOOL dealer for a replacement. Always give the com- plete model and serial number of your freezer

when requesting a replacement key.

The

signal light...

automatically

warns of any unexpected

power

failure.

--

Signal

Light

/

To replace

burned out signal light:

If the

signal

light

is not glowing,

immediately check.

1, Unplug power cord from outlet

2 Open

the freezer door.

l

for power interruption,

3. Unplug

burned

out

light and replace

with one of

l

for on unplugged

power

cord,

same

wattage

and

size. Signal

light

con be

l

for a

burned

out

signal

light

ordered

from your

WHIRLPOOL

dealer,

Part No. 1103680

4. Close freezer door and plug power cord into outlet.