Removal and rearrangement of the refrigerator and freezer shelves
The shelves may be positioned to suit your particular requirements.
The glass shelves are strong enough to hold bottles, milk cartons and heavy food; nonetheless, avoid banging these down on the shelves.
To remove the shelves:
Slide the shelf out until it stops, then lift it up and remove it.
Removal of the fruit and vegetable drawer or the meat drawer:
•Slide the drawer out until it stops;
•With one hand underneath the drawer, lift it and pull it out;
•The drawer will come out of its runners and can be pulled out further;
•To remove completely, the drawer will need to be rotated: front end up, back end down.
To remove the glass cover of the drawer
•Lift the front of the frame 10 cm, then with your other hand, lift the back of the frame and pull it out.
To replace the glass cover of the drawer
•Insert the back of the frame in the supports on the refrigerator walls and lower it back into place.
Meat drawer temperature control
•The cold air flows into the meat drawer through an opening between the refrigerator and the freezer compartment. In this way the temperature inside the meat drawer is lower than in other parts of the refrigerator. Set the slider for higher or lower airflow.
•If you wish to store vegetables in the meat drawer, move the control all the way to the left to the vegetables setting. This avoids possible frost damage to the vegetables.
34