Whirlpool W10193166A Temperature and Moisture, Ice and Water, Temperature is too warm

Page 11

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Are the gaskets dirty or sticky? Clean gaskets with mild soap and warm water.

The lights do not work

■Is a light bulb loose in the socket or burned out? See “Changing the Light Bulbs.”

■Is the dispenser light set to OFF? On some models, the dispenser light will operate only when a dispenser lever/pad is pressed. If you want the dispenser light to stay on continuously, set the dispenser light to ON, or (on some models) NIGHT LIGHT or AUTO or HALF or DIM. See “Water and Ice Dispensers.”

■Is the dispenser light set to NIGHT LIGHT or AUTO? On some models, if the dispenser is set to the NIGHT LIGHT or AUTO mode, be sure the dispenser light sensor is not blocked. See “Water and Ice Dispensers.”

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture-proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Recommended Grounding Method LocationRequirementsElectrical Requirements Water Supply RequirementsStyle Connect Water SupplyReverse Osmosis Water Supply Refrigerator USE Using theControlsTemperature Control Adjustment and Cooling On/Off Refrigerator Controls Adjusting the ControlsCondition Temperature Adjustment Additional Features Fast Cool and Fast IceWater and Ice Dispensers ConvertibleDrawer Temperature ControlCrisper Humidity Control Chilled Door BinRemember Ice Maker and Storage BinTo Dispense Water To Dispense IceWater Filtration System CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water Temperature and MoistureTemperature is too warm Standard Base Filter Cartridge AccessoriesStainless Steel Cleaner and Polish Dispenser water is not cool enough on some modelsWater Filter Certifications Base Grille Water Filtration System Performance Data SheetsBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Disclaimer of Implied Warranties Limitation of Remedies Limited WarrantyItems Excluded from Warranty This limited warranty does not coverRéfrigérateur Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationExigences demplacement Déballagedu réfrigérateurRaccordement de la canalisation deau Méthode recommandée de mise à la terreSpécificationsélectriques Spécifications de l’alimentationen eauRaccordement au réfrigérateur Commandes du réfrigérateur Utilisation des commandesAchever l’installation Ajustement des commandesCondition Ajustement DE LA Température Commande detempérature dans Le tiroir convertibleDistribution d’eau Compartiment fraîcheur dansla porteDistributeurs d’eau et deglaçons Distribution de glace Machineà glaçons et bac dentreposageNettoyage Remplacement du filtre à eauEntretien DU Réfrigérateur Système de filtrationde leauFonctionnement du réfrigérateur Remplacement des ampoules d’éclairageDépannage Les portes sont difficiles à ouvrir Température et humiditéGlaçons et eau Cartouche du filtre de la base standard AccessoiresNettoyant et poli pour acier inoxydable Système de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 La présente garantie limitée ne couvre pas Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée Articles Exclus DE LA GarantieWhirlpool Corporation 10/09 All rights reserved W10193166A SP PN W10193167A

W10193166A specifications

The Whirlpool W10193166A is a top-tier appliance that exemplifies innovation and efficiency in home washing solutions. A versatile washing machine, it combines functionality with user-friendly features, making laundry less of a chore.

One of the standout features of the W10193166A is its large capacity drum, designed to accommodate bulky items such as blankets and bedding. This ensures that users can complete larger loads in a single wash, saving time and energy. The machine employs a powerful agitator system that ensures a thorough clean, providing excellent stain removal while being gentle on fabrics.

Incorporating advanced technology, the W10193166A includes Adaptive Wash Technology, which automatically senses the needs of each load and adjusts wash actions accordingly. This not only enhances cleaning efficiency but also helps to optimize water and energy usage, making it an eco-friendly choice for conscientious consumers.

Moreover, the washing machine features a variety of customizable wash cycles, allowing users to select the best settings for different fabric types and soil levels. With options for delicate, heavy-duty, and quick washes, the machine caters to all laundry needs. The option for a steam clean cycle is particularly noteworthy as it helps to remove tough stains and reduces the need for harsh chemicals.

Another significant characteristic is the noise reduction technology integrated into the design of the W10193166A. This feature ensures that the washing machine operates quietly, making it an ideal choice for homes with open-concept living spaces, as well as late-night laundry sessions.

The user interface is straightforward, featuring intuitive controls and a clear display that makes it easy to operate. Additionally, the machine is designed with a sleek exterior, which can complement various home decor styles seamlessly.

In terms of durability, Whirlpool is known for its commitment to quality and the W10193166A is no exception. Built with robust materials, this washing machine promises longevity and reliability.

Overall, the Whirlpool W10193166A is a smart investment for anyone seeking a high-efficiency washing machine that combines innovative technology, user-friendly features, and effective cleaning performance, all while maintaining a stylish appearance and energy efficiency.
Top Page Image Contents