Whirlpool W10193166A installation instructions Refrigerator USE, Using theControls

Page 5

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

C

D

E F G

A. Refrigerator water tubing

 

E. Ferrule (purchased)

B. Nut (provided)

 

 

F. Nut (purchased)

C. Bulb

 

 

 

G. Household water line

D. Coupling (purchased)

 

 

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Style 3

1.Remove and discard the cap from the gray water tube.

A B

A.Cap

B.Inlet

2.Using a compression nut and sleeve, attach the copper tube to the water inlet.

3.Once secured, tighten the compression nut. Do not overtighten.

4.Check the connection by pulling on the copper tubing. Turn on water supply to refrigerator. Check for leaks. Tighten any nuts or connections that leak.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

REFRIGERATOR USE

Using theControls

Temperature Control Adjustment and Cooling On/Off

The refrigerator and freezer control buttons are located on the dispenser panel.

To turn cooling off, press and hold the LOCK and FAST ICE/COOL buttons at the same time for 3 seconds. Press and hold LOCK and FAST ICE/COOL again to turn cooling on. Your refrigerator and freezer will not cool when cooling is off.

IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time.

For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still set to the “mid-settings.”

To view set points, press the TEMPERATURE button on your dispenser panel. The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Electrical Requirements LocationRequirementsWater Supply Requirements Recommended Grounding MethodStyle Connect Water SupplyReverse Osmosis Water Supply Refrigerator USE Using theControlsTemperature Control Adjustment and Cooling On/Off Condition Temperature Adjustment Adjusting the ControlsAdditional Features Fast Cool and Fast Ice Refrigerator ControlsCrisper Humidity Control ConvertibleDrawer Temperature ControlChilled Door Bin Water and Ice DispensersTo Dispense Water Ice Maker and Storage BinTo Dispense Ice RememberTo Clean Your Refrigerator CleaningRefrigerator Care Water Filtration SystemRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water Temperature and MoistureTemperature is too warm Stainless Steel Cleaner and Polish AccessoriesDispenser water is not cool enough on some models Standard Base Filter CartridgeWater Filter Certifications Base Grille Water Filtration System Performance Data SheetsBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Items Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of RemediesRéfrigérateur Sécurité DU RéfrigérateurExigences demplacement Instructions DinstallationDéballagedu réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurSpécificationsélectriques Méthode recommandée de mise à la terreSpécifications de l’alimentationen eau Raccordement de la canalisation deauRaccordement au réfrigérateur Achever l’installation Utilisation des commandesAjustement des commandes Commandes du réfrigérateurCondition Ajustement DE LA Température Commande detempérature dans Le tiroir convertibleDistribution d’eau Compartiment fraîcheur dansla porteDistributeurs d’eau et deglaçons Distribution de glace Machineà glaçons et bac dentreposageEntretien DU Réfrigérateur Remplacement du filtre à eauSystème de filtrationde leau NettoyageFonctionnement du réfrigérateur Remplacement des ampoules d’éclairageDépannage Les portes sont difficiles à ouvrir Température et humiditéGlaçons et eau Cartouche du filtre de la base standard AccessoiresNettoyant et poli pour acier inoxydable Système de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 Garantie Limitée Garantie DES Gros Appareils Ménagers Whirlpool CorporationArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pasWhirlpool Corporation 10/09 All rights reserved W10193166A SP PN W10193167A

W10193166A specifications

The Whirlpool W10193166A is a top-tier appliance that exemplifies innovation and efficiency in home washing solutions. A versatile washing machine, it combines functionality with user-friendly features, making laundry less of a chore.

One of the standout features of the W10193166A is its large capacity drum, designed to accommodate bulky items such as blankets and bedding. This ensures that users can complete larger loads in a single wash, saving time and energy. The machine employs a powerful agitator system that ensures a thorough clean, providing excellent stain removal while being gentle on fabrics.

Incorporating advanced technology, the W10193166A includes Adaptive Wash Technology, which automatically senses the needs of each load and adjusts wash actions accordingly. This not only enhances cleaning efficiency but also helps to optimize water and energy usage, making it an eco-friendly choice for conscientious consumers.

Moreover, the washing machine features a variety of customizable wash cycles, allowing users to select the best settings for different fabric types and soil levels. With options for delicate, heavy-duty, and quick washes, the machine caters to all laundry needs. The option for a steam clean cycle is particularly noteworthy as it helps to remove tough stains and reduces the need for harsh chemicals.

Another significant characteristic is the noise reduction technology integrated into the design of the W10193166A. This feature ensures that the washing machine operates quietly, making it an ideal choice for homes with open-concept living spaces, as well as late-night laundry sessions.

The user interface is straightforward, featuring intuitive controls and a clear display that makes it easy to operate. Additionally, the machine is designed with a sleek exterior, which can complement various home decor styles seamlessly.

In terms of durability, Whirlpool is known for its commitment to quality and the W10193166A is no exception. Built with robust materials, this washing machine promises longevity and reliability.

Overall, the Whirlpool W10193166A is a smart investment for anyone seeking a high-efficiency washing machine that combines innovative technology, user-friendly features, and effective cleaning performance, all while maintaining a stylish appearance and energy efficiency.
Top Page Image Contents