Verify Anti-Tip Bracket Location, Level Range

3-wire connection: Direct Wire

Use this method only if local codes permit connecting ground conductor to neutral supply wire.

1.Loosen (do not remove) the hex washer head screws and insert the neutral (white) wire under the screw clamp at the bottom of the center position terminal connector.

	D
C
	E
	F
B	G
	G
A
A. Line 1	E. Neutral (white) wire
B. Ground-link	F. Line 2
C. Hex washer head screw	G. UL listed conduit
D. Silver-colored terminal	connector and power
block screw	supply cable

2.Insert the other 2 wires (lines 1 and 2) under the other 2 screw clamps.

Verify Anti-Tip Bracket Location

1.Pull drawer open to first stop position. Lift front of drawer to clear white wheels in drawer guides. Remove drawer and set it aside on a protected surface.

2.Making sure the anti-tip bracket is installed:

■Look for the anti-tip bracket securely attached to floor.

■Slide range back so rear range foot is under anti-tip bracket.

3.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the standards in the “Location Requirements” section.

A.Insert wire under screw clamp.

B.Hex washer head screw

3.Securely tighten the hex washer head screws to

35 lbs-in. (4.0 N-m) minimum torque to make a proper electrical connection.

4.Tighten the locking ring of the conduit connector.

5.Replace the terminal block cover.

Level Range

1.Place rack in oven. Place level on rack and check levelness of range, first side to side; then front to back.

If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket.

On Ranges Equipped with Storage Drawers:

Use ³⁄₈" drive ratchet and channel lock pliers to adjust leveling legs up or down until range is level. Push range back into position. Check that rear leveling leg is engaged in anti-tip bracket.

On Ranges Equipped with Warming Drawers:

Use channel lock pliers to adjust leveling legs up or down until range is level. Push range back into position. Check that rear leveling leg is engaged in anti-tip bracket.

NOTE: Range must be level for satisfactory baking conditions.

2.Replace the storage drawer (and warming drawer on some models).

9762035A specifications

The Whirlpool 9762035A is a cutting-edge appliance designed to enhance your laundry experience. As a washer and dryer combo, this model packs a variety of features and technologies that underscore Whirlpool’s reputation for innovation and efficiency. Its modern design not only adds a sleek aesthetic to any laundry room but also maximizes functionality for busy households.

One of the standout characteristics of the Whirlpool 9762035A is its capacity. With generous interior space, it offers ample room for washing and drying larger loads, making it an ideal choice for families or individuals with active lifestyles. The combo unit also consolidates space, eliminating the need for separate machines and allowing for greater flexibility in smaller homes or apartments.

This model is equipped with several advanced washing technologies that ensure clothes are treated with care. The Adaptive Wash Technology senses the needs of each load, adjusting the wash action and spin speed for optimal cleaning, while its Smart Load Sensing capability measures the size of the load and adapts water levels accordingly, promoting water conservation.

Drying is made efficient with the unit’s EcoBoost option. This feature utilizes lower temperatures and extended drying times, significantly reducing energy usage while still delivering fresh, dry laundry. The dryer also offers a variety of timed dry cycles, allowing users to customize drying sessions based on their schedules and preferences.

Another highlight of the Whirlpool 9762035A is its user-friendly interface. The intuitive control panel features clear, straightforward settings, making it simple to select the desired wash and dry cycles. Additionally, its Quiet Wash system minimizes noise, allowing you to operate the machine without disturbing the household.

In terms of convenience, the appliance includes a delay start option, enabling you to schedule loads to run at a more convenient time. The stainless steel drum is durable and resistant to chipping, ensuring longevity while preventing rust and stains.

Overall, the Whirlpool 9762035A combines innovative technology with practicality, solidifying its place as a highly sought-after appliance for modern living. With its impressive features and user-centric design, it stands out as a top choice for those seeking efficiency, performance, and convenience in their laundry routine.